Hudson Hi-Fi Vinyl Record Cleaner Antistatische Borstel - Record Cleaning Arm Borstel Cleaner Antistatische LP Reinigingsborstel - Draaitafel Schoonmaak Record Borstel

Great

Was a bit fiddly to set up, but really works well for stopping pops from static. Well worth the money.

Easy to install, looks great with the turntable and Hi-Fi gear and works well. Additionally it enables me to enjoy my vinyl LP collection whilst protecting the stylus from dust.Thanks Amazon.

This easy to setup and use record cleaner and de-statisizer works as it was designed.Contrary to many beliefs the clicks and pops heard on vinyl LP's is usually not dirt or grunge, at least not on well cared for and properly cleaned LP's. But it's often static charge build up on your vinyl LP's.Though ground in dirt on often or notably used LP's may not be cleanable, and groove damage, scuffs or scratches will be heard as clicks, pops and distortions, if one can keep ahead of dust that falls on your vinyl LP's as you listen to them and can reduce static charges, then you will often your vinyl LP listening to be more enjoyable.This Hudson record cleaning wand set up is to be used in conjunction with good record cleaning set up. I personally use a Spin Clean Record Washer to clean all my vinyl LP's firstly. This does a great job of deep cleaning records. But one thing I find Spin Clean may add, is static build up as you wipe dry the vinyl LP's after washing them. This may cause one to think it does not clean well enough, but it does. You just have to get at the static charges next.When playing your vinyl LP's you should run at first a carbon fibre brush before play, making sure to ground out the brush over the spindle or other metal surface that is grounded on the turntable as you destatisize the brush. Run it a few times over your LP's before lowering the tonearm for play.Another choice is a record brush used with cleaning fluid to dampen it such as the Discwasher cleaning brush and D4 fluid (the older ones used from the 70's and 80's are best). The Audio Technica AT-6012 record brush and fluid are a good choice for new alternatives as well as there are other brands which may work well enough too.But it's important to run a cleaning brush over the LP before listening to it so as to help rid of some surface dust and to help reduce built up static, especially in the dryer winter months.But here is where this Hudson record cleaning wand can help improve things more. It runs over the vinyl LP grooves as you play the album. It sweeps away falling dust and helps reduce static charges that cause clicks and pops.I found that once you balance the wand with the twist-able back counter weight, to then turn it just a couple turns forward and then slide the little slip weight to the front of the wand. This I found just has the brush fibres sit a bit harder on the record surface. Be careful if you have a belt drive turntable with fixed speeds though as this can cause a bit more drag slowing even if slightly the turntable speed down. If your turntable has variable pitch control you can adjust for this. If your turntable is quartz locked controlled, the computer will likely adjust the speed accordingly.This all said, I found the Hudson cleaning wand set up to do EXACTLY what it is to do, sweep falling dust away and help reduce static. No, it may not stop all clicks and pops, for again those could also be from ground in dirt and grunge or from groove damage, scuffs and scratches. But if your vinyl is generally clean and quiet, this addition may keep it that way for you.Well worth the money to try if you p,an on being a vinyl LP listener and collector.

Excelente calidad, el producto me resultó fácil de instalar y trabaja a la perfección, muy recomendable