ID-COOLING FROSTFLOW X 240 CPU Waterkoeler AIO Koeler 240mm CPU Vloeibare Koeler Wit LED 2x120mm PWM Ventilatoren, Intel 1700/1200/115X, AMD AM5/AM4

Silenzioso e contiene bene la temperatura della cpu, si installa facilmente e l'unico led, bianco e tenue, e quello sopra la pompa

I bought two of these for xeon 2699v3 / 2699v4 thinking LGA 2011, which this product supports, would work for FCLGA2011-3. There is a slight difference in the mount of these sockets. I ended up dremmeling out one of the brackets a tad bit and mounting the screw standoffs straight to the motherboard, as this socket does not have holes from the back. Surprisingly after a bit of modification the bracket fits on top of the screw standoffs and it works really well. The 2699v4 server runs proxmox and after stress testing for 10 straight minutes the CPU doesn't want to even go over 41c. The 2699v3 however is running windows and runs a bit hotter, likely due to an old NZXT case that has poor circulation and only a few fans. Funny enough these xeons, paired with a 3060, can run AAA rated games with ease. So if anyone else is crazy enough to try this product with a FCLGA2011-3 socket type, just wanted to say it is possible with modifying one of the brackets. The bracket that nearly fits needs to be cut out a bit more towards the outer edge and it will fit. From loud server builds to liquid cooled quiet monsters. Good product and excellent price.

Used to replace a similar cooler that was 3 times the price when purchased and expired a couple of days outside the warranty. Now the old cooler was certainly very pretty(lots of whirly coloured lights on the fans.) and it worked well enough until it didn't any more. This cooler concentrates just on what it needs to do, that is keep your CPU cool. Its looks are sleek and minimalist. Currently, it is keeping an AMD Ryzen 5 7600 6-core CPU at 52c for all the ordinary stuff and its fans are barely turning so it's almost completely silent. Running 7 days to die on high settings the core temp rises to 75c and you can hear the fans but it's a long way from being noisy. Installation is not as easy as it should be, purely because the documentation is pretty minimal. It comes with parts that allow it to be fitted to a wide range of AMD and Intel CPUs and MOBOS, so there are many extra parts that can be confusing. Fitting is means taking off and throwing away the existing cooler mounting clips. No clips just some mounting posts and four screws which makes it a lot easier to fit without removing the motherboard from the case and much easier to lower the block smoothly down onto the thermal compound without accidentally smearing the compound where it's not supposed to go.Just 2 electrical connectors to the motherboard. one for the block which connects to the water pump header on the motherboard and one for the fans which connects to the CPU fan header. Overall it's a great buy and terrific value for money,

Works good. The fans are loud and don't move much air. Will be replacing with a noctua fan.

It cools, It’s quiet… most of the time. Sometimes air bubbles in the radiator get pushed around the loop and make a bit of a noise but that’s only sometimes. Been using for over a year and no problems.