Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

iShoot Metalen Lens Collar Statief Mount Ring Compatibel met Canon RF 100-500mm f/4.5-7.1L is USM, Lens Ondersteuning Houder Beugel Bodem is Arca-Swiss Fit Quick Release Plaat Zwaluwstaart Groove

30,99€ 63,46€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • 1. De originele structuur en het ontwerp van F (WIII) worden aangenomen en de functie van quick release plaat wordt aan de onderkant toegevoegd; de binnenwand van de statiefringbeugel is een concave-convexe onregelmatige structuur, die nauw is geïntegreerd met de lens; compatibel met Canon RF 100-500mm f/4.5-7.1L IS USM Lens, kan niet worden gebruikt voor andere lenzen;
  • 2. Het contactoppervlak is plastic composietfolie, draagt geen lensoppervlak wanneer correct geïnstalleerd; er mogen geen stickers op de installatiepositie van het lensoppervlak zitten, als dat zo is, verwijder het, anders zal het de normale installatie beïnvloeden; na installatie kan het vrij worden gedraaid zoals de originele statiefring;
  • 3. Het statief kraag onderkant is toegevoegd 60mm lange Arca fit quick release plaat functie, compatibel met Arca-Swiss 39mm fit statief kogelkop, panoramische kop en klem direct; praktischer dan lenskragen zonder QR-Plate;
  • 4. De Lens steunbodem gereserveerd 1/4 inch en 3/8 inch schroefgaten en roestvrijstalen anti-slip schroeven voor het direct bevestigen van de lens aan het statief;
  • 5. De lenskraag IS-RF150 kan worden gecombineerd met klembevestiging converter IS-3950PRO (apart verkocht), die kan worden gebruikt voor hydraulische koppen met Manfrotto structuur.


Productbeschrijving

iShoot Lens Collar Statief Mount Ring IS-RF150, compatibel met Canon RF 100-500mm f/4.5-7.1L IS USM Lens
Onderkant is 39 mm ARCA Fit Quick Release Plate Feature, compatibel met Statief Hoofd & Klem van RRS/ARCA-SWISS Fit
Belangrijkste kenmerken:
1. De originele structuur en het ontwerp van F (WIII) worden goedgekeurd, en de functie van de snelle versieplaat wordt toegevoegd aan de bodem; de binnenmuur van de steun van de statiefring is een concaaf-convexe onregelmatige structuur, die nauw met de lens is geïntegreerd;
2. De contactoppervlakte is plastic samengestelde film, zal de lensoppervlakte niet dragen wanneer correct geïnstalleerd; er zouden geen stickers op de installatiepositie van de lensoppervlakte moeten zijn, als er is, verwijder het, anders zal het de normale installatie beïnvloeden; na installatie kan het vrij worden geroteerd zoals de originele statiefring;
3. De statief kraag onderkant is toegevoegd 60 mm lange Arca fit quick release plaat functie, kan worden gebruikt met 39 mm Arca-swiss fit statief kogelkop, panoramische kop en klem direct; praktischer dan lenskragen zonder QR-plaat; ook gereserveerd 1/4 inch en 3/8 inch schroefgaten en roestvrijstalen anti-slip schroeven voor bevestiging lens aan statief direct?
4. Deze lenssteun onderaan de zwaluwstaartgroef is 39 mm Arca-Swiss standaard, compatibel met RRS/ARCA-SWISS/ISHOOT statief hoofdklem van Arca 39 mm fit, geschikt voor iShoot IS-JZ30/IS-JZ50/IS-JZ64/IS-QJ58/IS-QJ64-FD/IS-JZ60BK / IS-IS-IS--JZ70MFK T/IS-JZ80BK;
5. De statiefring is gemaakt van Luchtvaart Aluminium, CNC nauwkeurig machinaal bewerkt, hollow-out gewichtsverminderingsontwerp, gepolijst en oppervlak geanodiseerde afwerking. Het uiterlijk en de uitstekende afwerking zijn veel beter dan vergelijkbare producten gemaakt door schimmel.
Het pakket bevat:
1 x iShoot Statief Mount Ring IS-RF150 Compatibel met Canon RF 100-500mm f/4.5-7.1L IS USM Lens
(Opmerking: De andere items in de foto's die hier niet worden vermeld, zijn alleen ter illustratie, niet inbegrepen)


Edwin
7 augustus 2025
Fits the RF100-500 lens as a glove. I love this item because of the Arca fit quick release plate feature. You can fit it directly on a tripod. On the original mount ring you have to mount a additional quick relaes plate. I don't understand why Canon did not think of this on a $ 3.000+ lens.
Wim Coene
15 juni 2025
As many of us, my Canon RF 100-500mm lens suffered from a mal-functioning tripod collar ring, in terms of limited fixing capabilities. My complaint towards Canon-Service in The Netherlands was not at all seriously addressed, since they just closed my case without solving it. So I could do two things. Or be stubborn and start the contact with Canon-Service again, and go through all emotions and frustrations, or go for the easy way, and buy a new ring from another brand, like Leofoto, iShoot or Haoge, at the cost of a few tens of Euros or USDs. Tonight, my iShoot collar arrived from Amazon.nl. And yes, all slipping problems are completely gone now, it is a pleasure that I can trust this ring's fixing capabilities, unlike the Canon original ring. A real pity that a company that makes such excellent optics does so bad for something as simple as a mechanical ring. Anyhow, the frustration is gone, but I won't forget this negative Canon experience !
Gino
23 mei 2025
Een jaar terug deze iShoot Metalen Lens Collar Statief Mount Ring Compatibel met Canon RF 100-500mm f/4.5-7.1L gekocht omdat ik van de Manfrotto snelkoppelingsplaat af wilde.Een paar maanden kon ik deze iShoot gebruiken en toen lieten de binnenste ringen die voor weerstand zorgen al los. Met als gevolg dat de lens draait zonder dat ik het wil en dat vind ik erg vervelend. Het was juist zo fijn om een statief mount ring te hebben die zonder extra snelkoppelingsplaat gebruikt kon worden.Ben al aan het zoeken gegaan om te zien of er nu een goede vervanger is, anders blijf ik het maar doen zoals ik het voorheen ook deed met de extra plaat eronder, het is niet anders.Ik beveel deze in ieder geval niet aan voor intensief gebruik, want dat is het sneu geld.
John David Butler
30 maart 2025
Good, solid item, fits well and holds the lens firmly. The Arco swiss mount makes it a great piece of kit. All that and at a good price.
Matthew Herold
15 maart 2025
As other reviewers mentioned, the original collar on the RF 100-500 L is shameful. I RMA’d three different lenses to B&H photo because the tripod collar would not completely secure down to the lens, and each lens I received back was worse than the one before (all new and unopened). Ridiculous. This is a poor design on Canon’s part. The felt liner inside the collar compresses over time to the point it no longer functions!I gave up with RMA and bought this instead. It’s perfect and the built-in ARCA mount is the best thing about it.Only two complaints that didn’t warrant knocking off a star (yet): 1) the knob is not as low profile as Canon’s, so it fit a little differently/tighter in my camera bag. 2) the foot lacks a rounded top edge, so hand-gripping the camera by the lens collar foot is a little uncomfortable. I imagine for a long period of time free-handing this camera it would get annoying. Obviously not a problem if the lens is mounted to tripod or monopod.
Customer
31 januari 2025
J’ai longtemps hésité, mais depuis que je mets un peu de poids sur l’appareil de la main droite, la caméra tourne, le pied canon ne serre pas assez, celui-ci est plus large et tiens bien, en plus ce pied est compatible pour mettre sur ma tête pivotante ce que je ne pouvais faire avec celui de canon
Nick T.
28 januari 2025
I trust this collar to support my expensive 100-500 lens. I love that it has the dovetail foot and I don't have to faff with adapters. My only complaint is that the thumbscrew is a bit janky compared to the Canon collar. It doesn't turn quite as smoothly and it takes a bit more rotation to shift from locked to just turning than Canon's version. Minor concern.
Stéphane Crouet
2 januari 2025
Tres bien, prix 3 fois moins cher comparé au modele d origineJe n ai jamais eu le canon donc je ne peux comparer, mais j ai lu qques critiques peu flatteusesCelui ci est solide, tres bien fini, et à le pied de soutien compatible arca swiss sans rajouter d adaptateur, parfaitSeul bemol, le pieds est un peu plus large que les canon, pas compatible avec la piece dediée d un kit cover lens que j avais acheté, mais il est noir donc ca reste discret tt de même