Jagwire Indrukgereedschap

L'ho trovato molto utile e comodo. Lavoro perfetto. Ottima qualità dei materiali. Consigliato.

Perfecto, robusto y duradero

Well made and well performing product.The push pin is double ended, one fits shimano, one fits sram.A spare pin is included.Instructions are included, well written and clear.BUT instruction 3,e# tells people with a shimano system to position the compression olive 4mm from the end of the hose.THIS MAY APPLY TO SOME SHIMANO BRAKES BUT DOES NOT APPLY TO ALL.It didn't apply to mine and the nut would barely catch a single thread into the brake lever because the olive was holding it too far out. With the hose insert in place the olive needs a pair of pliers to move it closer to the hose end, with the possibility of damage to the sealing surfaces. Luckily I got away with it.Check the position of the olive on the old hose you are replacing and position the new olive in the same place on the new hose.

確実に奥までインサートが入ります。ホース押さえる部分もしっかりしていて、ゆるくなったとしても調整できるのでほぼ一生使えます。シマノは値段高いくせにホースカッターも使いにくくてすぐ壊れるし、インサートツールはホースとプレスする部分がセットしずらいし、おまけにホース抑える部分が緩くて最後までインサート挿れられない始末。最初からこっち買っておけば良かった。

While barbs can usually be driven without this tool, this tool makes the job of driving barbs so much easier and does a better job. If all you are concerned about is being able to drive a barb for Shimano or Sram, grab a pair of vice grips, a plastic hose block and a hammer and read no farther. However, if you are in the situation where you want to insure the barb is driven straight, will hold without leaking, and is done right, this is the tool for you. This tool is really intended as a shop use tool and the price reflects that. If you're only ever going to drive one or two hose barbs you can probably get by without this tool. This tool does do a couple key things though, 1: It drives the barb straight, every time 2: The tool both clamps the hose and drives the barb meaning that you can effectively use it with two hands and not be juggling tools like you have to when driving with a hose block.Using this tool lets me more quickly and efficiently drive hose barbs while knowing that the barb isn't going to leak because it went in crooked. While this tool isn't strictly necessary, it has become one of my favorite tools because it transforms the sometimes frustrating job of shortening hose lines and turns it into a very easy task. The tool is well constructed and even though it's plastic, I expect it to last for many, many years. The way I see it, this tool is well worth it if it saves me from having to do a bleed even once or twice. Most shops charge $25 for a bleed, so if this tool helps avoid a bleed when shortening the lines even once, or avoids leakage from a crooked barb, it has paid for itself.