Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
Echte Japanse dubbele vertanding (Japanse fabricage) Ryoba voor massief hout, lange en dwarse platen. Omkeerbare zaag aanbevolen voor spaanplaat, versus gefineerd, latten, melamine, MDF ... ook aanbevolen voor kunststofmaterialen, gelakte platen, acryl, pvc, ivoor... Bladlengte: 180 mm bladdikte 0,5 mm tandsteek: 1,5 mm vertanding gehard door elektrische impuls, proces dat de levensduur van het blad verhoogt. snijden wordt verwarmd door een elektrische stroom van 27.12 MHz gedurende een periode van 0.003 tot 0.005 seconde, dit creëert een schokgolf op het oppervlak van de tand door deze te verharden Hv900 - 1200
Wettelijke disclaimer
De geleverde producten blijven eigendom van LUXOUTILS tot de volledige en feitelijke betaling van de prijs door de klant
Ceyhun s.
8 augustus 2025
Estetik ve keskin.
Manoj Jain
26 juni 2025
Superb!!!!!!Teak wood loves to get cut by this gentle Japanese saw.One can cut any angle, any tilt.Great for dovetail cutting.
Guilyn
9 maart 2025
J'ai découvert ce type de scie part une connaissance japonaise étudiante en arts appliqués . J'ai été si emballée par ses qualités que j'en ai offert pour Noël à 3 bricoleurs de ma famille . D'abord surpris, c'est un outil dont ils ne pourraient plus se passer désormais car cette scie à main d'un concept très différent de nos scies occidentales les surpasse quand on recherche des coupes fines, bien droites et sans effort , avec une finition soignée. Des liteaux, des baguettes d'encadrement, du parquet etc... elle a même recoupé très proprement un plan de travail mélaminé de 3cm d'épaisseur avec une coupe parfaitement droite et sans éclats du mélaminé ce que n'aurait su faire ni une scie circulaire ni une scie sauteuse . Lame changeable sur ce modèle ( mais pas encore effectué malgré un usage non intensif mais régulier ) . Même s' iI en existe de plus belles et performantes (mais aussi plus chères) celle-ci offre déjà un excellent rapport qualité/prix à qui veut découvrir la scie japonaise sans se ruiner . Un outil indispensable loin du gadget..
Daniel
19 januari 2025
This is hands down an excellent example of a Japanese pull saw. It cuts through wood like butter giving you perfect cuts.
TheHobbyGuy
30 december 2024
This saw is a great addition to the many saws I have in the shop. It allows me to make fine and precise crosscuts and ripcuts with a very fine finish. The blade will cut through hardwoods pretty easily and efficiently. Being a Japanese saw, it cuts on the pull of the cut rather than the push. I like this for certain cuts I make on my works. The blade is very flexible, so this can be a limiting factor if you are looking for the saw to stay perfectly straight. The blades are removable in this saw so they should be replaceable.With the following miter box I have no problem achieving very straight 45 degree cuts with this saw: The dimensions of the product can be seen in the photos I uploaded.Pros:*Fine finish after cutting*Cuts efficientlyCons:*Saw blade is a bit too flexible. If you get used to it this can become a minimal factor (-1/2 a star)Additional Considerations:Remember this is a Japanese style saw. It cuts on the pull, not the push. If you want something more rigid there are similar Japanese saws with a reinforced back edge of the blade to prevent flex.Overall: 4.5/5 stars (>=.5 rounds up, 5 starsIf you have any further questions regarding the product in my review please leave a comment below and I will get back to you as soon as possible.
Aanbevolen producten
