JENOLITE Roestomvormer Spuitbus | RUSTBEHANDELING | Roest omzetten in gereed om te schilderen oppervlak | Eenvoudig op verroeste oppervlakken spuiten | Op epoxy gebaseerde formule | 400 ml

Super

After a bit of research into what product was best for my needs, I opted for Jenolite Rust Converter Spray. Stone chips had broken through the paint around the arch areas of my campervan, looking unsightly. A quick rub down on the affected area with 80 grit oxide paper back to clean metal, masking tape applied to avoid any overspray, then follow the instructions on the can - shake contents for a few mins, then apply from around 25cms, leave to dry circa 15 mins, then re-apply. It's clear initially, but as it gets to work it turns black, after 2 coats a thick protective layer is formed, after fully dry / cured the epoxy feels tough and has good coverage, I'm letting it fully harden over this week, and will look to apply a top coat of colour matched spray paint, and clear lacquer top coat to blend it in, and will then apply 2 coats of the Jenolite on top of the colour matched spray paint for added protective layer as it is clear. Good product, good performance straight out the tin with minimal prep, instructions are simple to follow.

Emploi simple, rouille neutralisée, très bien.

Works great goes on clear turns black when it is converting the rust

Ottimo