Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

JINGLING 15 mm spoorverbreders PCD 4 x 100 naaf boring 54 mm voor Alto Swift Alivio Ogni Spacia Celerio P-eugeot 107/108 Ci-troen C1 2 stuks

16,99€ 30,99€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • 【Specificaties】: PCD: 4 x 100 mm (4 x 3,9 inch); schroefdraadspoed: M12-1,5; naafcentrale boring: 54 mm (2,1 inch) dikte: 15 mm
  • Opmerking: professionele installatie wordt sterk aanbevolen.
  • Veiligheid: gesmeed 6061 aluminium: bekend om zijn lichtheid en grote sterkte, deze billlet-aluminiumlegering is ook bestand tegen een strak gebruik.
  • 【Garantie】 Biedt 1 jaar garantie en gratis vervanging voor ontbrekende onderdelen


Productbeschrijving

Hallo vriend, bevestig deze informatie voordat je bestelt.

Technische specificaties:
Diameter van de gatencirkel (PCD): 4 x 100 mm.
Hub Center Bore (CB): 54 mm (2,1 inch)
Schroefdraadhelling: M12 x 1,5

Montage:
Voor Toyota Corolla / Vios / Vitz / Venza / Yaris / Aygo / Agya / Aqua / Calya / Etios / Pixis.
voor Mazda 2
Voor Suzuki Alto/Swift/Alivio/Every/Ciaz/Spacia/Baleno/Celerio/Solio.
Voor Peugeot 107/108 Citroen C1/C-Zero Fiat 124 Spider.
B.
Voor Toyota IQ 2008 ~ 201 Serie 10.
Voor Toyota Aqua 2011/12~ NHP10.
Toyota is 2002 ~ 2007 60 serie
voor Toyota Vitz 1999/1~2005/1 Serie 10.
voor Toyota Vitz 2005/2~2010/11 serie 90.
Voor Toyota Vitz 2010/12~2020/2 serie P1.
Voor Toyota MR2 1984/6~1989/9 AW1.
Toyota MR-S 1999/10~2007/9 ZZW30.
Voor Toyota Corolla 2000/8~2006/10 serie 120.
Voor Toyota Corolla Axio 2006/10 ~ serie 140/160.
Voor Toyota Corolla Verso 2001/5~2007/6 Serie 120.
Voor Toyota Corolla Ranks 2001/1~2006/9 Serie 120.
Voor Toyota Sprinter Trueno 1987~1991 AE92.
Voor Toyota Sienta 2003 ~ 2015 serie 80.
Toyota Spade 2012/7~2020/12 NP14.
Toyota BB 2000/2~2005/11 Serie 20/30.
Voor Toyota Probox 2002/7~2014/8.
voor Toyota Porte 2004/7~2020/12 NP1
Voor Toyota Yaris 2020/2~ Serie 10.
Toyota Rise 2019/11~200-serie.
Voor Toyota Ractis 2005/10~2010/11 serie P10.
Voor Mazda 2 2019/9~
Voor Mazda Roadster 1989/9~1997/12 NA-serie
Mazda Roadster 1998/1 ~ NB serie 2005/8.
Voor Mazda Roadster 2015/5~ ND serie
Professionele installatie wordt sterk aanbevolen.

❗ Belangrijke opmerkingen: ❗
1ste Overlaad de adapters niet.
2de Gebruik nooit smeermiddel op de stiften.
3de Professionele installatie wordt sterk aanbevolen.
4de De wielpennen van het voertuig moeten worden gesneden als ze langer zijn dan de dikte van de adapter/afstandsstuk.


cescoamazon
5 juli 2025
I ordered 15mm spacers, they seem to be of good aluminium quality.I didn't realize to check what thread mine on the car, or the ones on the spacers where, if they matched, I thoughtlessly assumed the nuts on the new spacers would fit my old original studs/threads on the car, but they didn't, the original car stud threads are also 12mm, but they are thread 1,25 mm, not thread 1.5 mm, as they are on the new spacers.I had to shorten my original studs a few mm's, in order to allow the wheel to fit snug on the new spacers, I also trimmed my original nuts a few mm's, and fitted them to bolt down the new spacers, I looked everywhere online to find new nuts to fit the spacers, it was not easy, but eventually I did find a seller that had the nuts I needed online elsewhere, because here on Amazon they have all kinds of bouts and nuts, but not the ones I needed, specially made for the job, fitting the spencers specifications,12mm diameter, 1.25 mm thread, 12 mm high, that fitted inside the new spacers, without sticking out of them, impeding the wheel to fit on snuggly and flush on the new spacers.
Jean-Francois Valence
16 april 2025
Article bien emballé, alliage bien réalisé aux bonnes dimensions, reçu en 48 heures.liquide loctite pour les écrous a prévoir!une centaine de kilomètres pas de problèmes...a voir dans la durée...
Danut Iftime
10 maart 2025
Suitable for Peugeot 107, Citroen C1 only if the bolts are removed
Raffaele
28 januari 2025
Acquistare 2 coppie per Peugeot 108 ma non compatibili nonostante fosse descritto di si. Non è possibile utilizzare la bulloneria di serie per fissare il distanziale al mozzo perché i fori sono più piccoli di 1 mm rispetto alla battuta della rondella e completamente diversa, e non è possibile fissare il cerchio al distanziale perché i bulloni forniti sono conici mentre la sede del cerchio è piatta. Contattato il venditore dopo aver visionato la foto conferma la giustezza del prodotto. È evidente che non è così almeno per la 108. Attenzione perché il filetto è di 1,5 e non 1,25. Proposte altre soluzioni ma tutte rifiutate. Appena possibile le restituirò. Perso solo tempo.
T. B. D.
20 januari 2025
Solid Aluminium, but they warn against Track use, so unlikely they are produced from 6061 T6 Billet. The 15mm version has very small nuts and thin wall to secure to the hub, which do not look to be toughened. They are only stamped with hub centre, thread gauge and width, no reference to any version of 6106, which was given in specification. I returned both the 15mm and 20mm pairs as it felt too great a risk even for road use.
Orazio
8 november 2024
Non va assolutamente bene la Citroen c1 in quanto i dati di fissaggio sporgono e non fanno aderire la ruota al mozzo.