JJC LH-XF27 Lenskap voor Fujifilm XF 27mm f/2.8 R WR-lens op Fuji X-S10 X-T4 X-T2 X-T3 X-T20 X-T30 DSLR Camera - Vervangt Fujifilm LH-XF27 lenskap Fotofotografie

Mooie nette uitvoering, past perfect

The hood is a nice looking piece of kit let down by poor fittings. The tiny grub screws need to be tightened a lot to prevent the hood from moving on the lens, and in doing so I stripped the threads in the hood.A previous review stated that it needed to be disassembled so, once the threads had been stripped and the unit was unusable, I tentatively took a hammer to it. Gently at first then with increasing strength managed to separate the two elements. It appears that the inner ring should be attached to the lens by screwing then the hood "should" slip on to the ring and be held in place by the grub screws. No way were these two elements moving over each other. It turns out that they were already locked by grub screws - those in the accompanying bag are spares. Stick the allen key in and loosen them and the two pieces come apart. You can then leave the ring on permanently and only add the hood when needed.I'll be buying an alternative. If you still want one of these I recommend you go to your LCS and ensure that there is play between the two elements.

Un peu lourd et disproportionné pour cet objectif 27 mm.

Et bien moins encombrant que celui d’origine

Chwiejne elementy pierścienia. Wystające śrubki. Ciężko zamontować. Odradzam zakup. Niszczy obiektyw- rysuje.Brak instrukcji montażu. Skalda się z dwóch elementów które powinny być najpierw rozmontowane.

Un poquito engorroso de colocar para los que somos MUYYYYY patosos, pero una vez apretado ya nunca más hay que tocarlo. Y decididamente queda chulísimo.

Paraluce in metallo di forma rettangolare con angoli smussati, montato su un'ottica fujifilm 28mm f 2.8 con diam. di 39mm è l'ideale per proteggere la lente da urti accidentali ed evitare flare. Non ho visto decadimenti percettibili nella luminosità dell'immagine. Bello il look vintage. Il meccanismo di bloccaggio richiede un po' di lavoro, in quanto serrando troppo i dadi si ha il timore di danneggiare il barilotto della lente, mentre lasciando i dadi più lenti il paraluce si muove un po'.Anche con il paraluce rimane la possibilità di montare filtri direttamente sulla lente.