Winkelwagen is nog leeg.
Winkelwagen is nog leeg.
Inbegrepen:
✔ DSO138 oscilloscoop printplaten en onderdelenkit
✔ 100 MHz oscilloscoopsonde met 1x/10x-functie.
✔ Alligatorclip oscilloscoopsonde.
✔ ESD-veilig, temperatuurbestendige siliconen soldeermat.
✔ Gedrukte montagehandleiding (mogelijk niet beschikbaar in het Nederlands), handleiding voor probleemoplossing en schakelschema.
Bouw je eigen functionele oscilloscoop voor je bank. Hoe cool is dat? ??
DSO138 (DSO 138, 13803K), 100MHz oscilloscoopsonde en ESD-veilige siliconenmat zijn bij de aankoop inbegrepen.
Heb je een vraag? Neem vandaag contact met ons op in uw taal! Wij staan altijd klaar om te helpen.
DSO138 Kenmerken:
✔ Analoge bandbreedte: 0 - 200 kHz.
✔ Bemonsteringssnelheid: 1 Msps max.
✔ Gevoeligheid: 5 mV/Div - 20 V/Div.
✔ Verticale resolutie: 12-bits
✔ Tijdbasis: 10us / Div - 500s / Div.
✔ Opnamelengte: 1024 punten.
✔ Ingebouwd 1 kHz / 3,3 V testsignaal.
✔ Behouden, opslaan, ophalen van functies
IVAN R.
18 juni 2025
Salen bastante malos y defectuosos
Scott H
17 juni 2025
All the components arrived and were in good shape. Took a few hours to put together and solder but I didn’t have any problems (I consider myself a novice for soldering components). I gave myself a 60% chance it wouldn’t work but it booted up with no problems on the first try. I was surprised and happy.The only thing I found was the connector to the leads on the board is a bit stiff and hard to connect. Seems like it wants to break the board when I try and connect. I plan on installing in a 3d printed power supply I was designing so I will change the leads connector to a banana plug design instead. But it seems like it’s not made for constantly removing and putting the leads back on. I figured I would put them on once and leave them on….Otherwise, a good build, instructions were clear and was fun!
Gennaro d'Alessandro
18 maart 2025
Le cinque stelle si riferiscono ovviamente ad un utilizzo nell'ambito appunto della didattica perché, per altro impiego, ad essere sincero, non ce lo vedo.
Luca
12 februari 2025
Das Produkt kam gut verpackt bei mir an. Leider musste ich feststellen das einige der mitgelieferten Teile beschädigt waren, weshalb das Produkt nicht funktionierte. Ich wand mich daher sofort an den Kundendienst (auf Englisch) welcher mir auch versucht hat zu helfen. Leider sind wir nach mehreren Tagen immernoch nicht zu einem brauchbaren Ergebnis gekommen, weshalb ich das Produkt letztendlich zurück geschickt habe. Die verarbeitung der einzelnen Teile sollte noch hervorgehoben werden, diese waren qualitativ gut.
D. Fell
3 november 2024
This kit has all the SMT parts already soldered - turns out some the fake kits doesn't do this - so be careful unless you really want to solder the QFPs yourself. I simply followed the instructions (more-or-less) and it worked 1st time (no one more surprised than me!) but was very disciplined in checking the resistors & caps before soldering in, then the semiconductors.So there are instructional user guides on YouTube worth watching & this came with decent probe and signal lead - will worth the extra cost. For audio and low frequency RF its useful - it is no Tektronix or similar but if like me you are fault finding LF stuff very useful. Highly recommended for instructional use in say classrooms or hobby activities
Aanbevolen producten
Aanbieding
27,99€
71,99€
Misschien vind je dit ook leuk