Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

KGUSS Topping HS02 USB2.0 Audio Isolator is bestand tegen tot 1500 VDC, USB-B- en type C-ingang, USB-A- en Type-C-uitgang, compatibel met PCM32bit 768kHz DSD512

46,99€ 119,00€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Volledig geïsoleerd design: de HS02 beschikt over een volledig geïsoleerd ontwerp, dat geen nieuwe storingen inbrengt wanneer de hulpvoeding wordt gebruikt, terwijl het audiosignaal geïsoleerd is van aardlus-storingen. Zeg vaarwel tegen de aardboog en zoem.
  • 👍 Schakelen tussen twee interfaces ▶️ De HS02 beschikt over twee ingangsinterfaces (inclusief USB-B en type C) en twee uitgangsinterfaces (inclusief USB-A en type C), waarvan elk door een ingang kan worden geselecteerd schakelaar of een uitgangsschakelaar. Opmerking: de ingang wordt gebruikt voor aansluiting op de computer, de uitgang voor aansluiting op USB-apparaten.
  • Hoge snelheid is ook zeer compatibel. HS02 ondersteunt de automatische detectie van USB 2.0-overdracht bij lage snelheid, volledige snelheid en hoge snelheid. De krachtige overdrachtscapaciteit is compatibel met audio met hoge resolutie zoals PCM32bit/768kHz en DSD512 Native.
  • 👍 Extreem lage latentie ▶️ De latentie bedraagt slechts 0,073 μs, wat volledig voldoet aan de eisen van hifi- en professionele toepassingen.
  • 👍 Verwijdert effectief de door de massablus ingevoerde ruis ▶️ Het geluid kan bij echte metingen met maximaal 50 dB worden verminderd.


Productbeschrijving


Topping HS02 USB 2.0 Isolator
Het is een krachtige USB-isolator met hoge snelheid, hoge compatibiliteit en lage latentie van 0,073 μs. De isolatie is bestand tegen 1500 VDC.
Met twee ingangsinterfaces (USB-B & type C) en twee uitgangsinterfaces (USB-A en type C) is hij naar keuze om aan je eisen te voldoen.
Met de krachtige compatibiliteit van PCM32bit/768kHz en DSD512 Native is het geschikt voor de meeste USB-decoder
Voor USB-apparaten die via de USB-poort van stroom worden voorzien, heeft HS02 een 5V-voeding nodig om voldoende stroom te leveren voor een betrouwbare werking van het USB-apparaat. Sluit de voeding aan op de andere ingang van de HS02.
Kenmerken:
Gemeten: 5,9 cm x 3,9 cm x 18 cm
Gewicht: 45 gram.
Stroomverbruik: DC 5 V/2 A.
Uitgangsvermogen: DC5V/800mA
Signaalingang: USB-B/type C.
Signaaluitgang: USB-A/type C.
Spanningsisolatie: > 1500 VDC.
USB-interface: USB 2.0 (ondersteunt low-, full- en high-speed modus door automatische detectie).
Vertraging: 0,073 us (typische waarde)
Opmerking:
Met de tuimelschakelaar kun je verschillende functies selecteren.
● De ingang wordt gebruikt voor aansluiting op de computer, de uitgang voor aansluiting op USB-apparaten.
● Wij raden aan om de HS02 direct op de pc aan te sluiten (USB-rootpoort in plaats van USB-hub).


Cèsar Martín Barbero
22 juni 2025
Hub con aislamiento galvánico para aislar tu dispositivo de audio (como por ejemplo un DAC) del PC. Este hub aisla completamente el ruido electrico que las computadoras producen hacia tu dispositivo de audio.Indispensable para equipos de audio y DAC's de alta calidad.
Jeff
21 april 2025
Excellent isolation. This instantly quieted my RME Fireface UCX ii down to complete silence. It’s wonderful, and worth every penny IMO.Build quality seems great too, and it’s much smaller than I was expecting (which is great).
Koli
8 maart 2025
I was dealing with GPU noise from my NVIDIA RTX 3060 12GB when a game was running with both my iFi Zen Air DAC and also my Topping DX3 Pro+. The reason is because my headphone amp is a valve/tube amp so it must be earthed due to the very high voltages, and this meant there was a ground loop with the noise from my PC. I tried the usual tricks of putting everything on the same extension lead, which while it did reduce the noise, it did not eliminate it and that was problematic when using my Beyerdynamic DT990 Edition 600 Ohm headphones.So I went ahead and got this USB isolator since it supports USB 2.0 hi-speed (so it should actually handle above PCM768 @ 32-bit and DSD512/48 without issues, but I do not have a DAC capable of going higher to test). While it was working, and the computer noise was ENTIRELY eliminated, I was getting random and very often cutouts from the audio. Windows and Audirvana could still 'see' the DAC, just that the audio stream was getting cut off for some reason. This was plugged into one of the USB 3.0 ports (*just* 3.0, not Gen 1 or higher). I decided to try plugging it into a USB 2.0 port as I do know there can be compatibility issues with 3.0 ports, and I also shortened the cable to 1.5m. This totally fixed the issue I was having, and now I can easily send PCM768/DSD512 to the Topping without any dropouts of any kind. The iFi also handles DSD256 without any issue too.Even new motherboards released today have USB 2.0 ports specifically because 3.0 (and higher) can't always handle 2.0 devices correctly, and after reading the datasheet for the USB isolator chip they're using, it is very specifically for 1.0, 1.1 and 2.0, and requires incredible precision on the circuit layout to work correctly - this is one reason why this is expensive.So it gets 5 stars because not only did it entirely eliminate the GPU noise, but the big improvement in the noise floor seems to have given the valve/tube amp a bit more room to breathe, as I noticed a subtle improvement in the attack of synthesizer sounds. Your mileage will vary here obviously, such as how well trained your ears are, what gear you're using and what audio format you're using.
Luca Fidanza
10 februari 2025
Avevo di problemi di ground loop quando collegavo un programmatore ISP ad una scheda, come suggeriva la stessa Microchip nei datasheet dei proprio programmatori, mediante questo oggetto il problema è scomparso
Eloyian
8 januari 2025
Ich wollte es einfach wissen bzw. selbst hören, ob man damit eine klangliche Verbesserung erzielen kann.In meinem Fall: eindeutig ja!Datenquelle ist ein günstiger, (insbesondere bzgl. Netzteil) weit von High End entfernter Android Medienplayer, auf dem mit UAPP eine spezielle App läuft, die für die sogenannte "bitgenaue" USB-Übertragung der Audiodaten sorgt (Betriebssysteme wie Windows und Android sind diesbzgl nur bedingt echtzeitfähig - spezielle Treiber sorgen hier für Abhilfe).So betrachtet eigentlich alles bestens, denn USB ist eine (auch bzgl. Software/Treiber) etablierte, genormte Schnittstelle, die benötigte Datenrate i.d.R. geradezu lächerlich. Datenfehler/Paketausfälle sind in nicht-industrieller Umgebung bei kurzer Verbindung und halbwegs vernünftigem Kabel praktisch ausgeschlossen. Allerdings könnte sich die bedrahtete Verbindung zwischen Quelle und Senke auswirken...Lange Rede, kurzer Sinn, ich bilde mir eine sofort und deutlich hörbare Verbesserung ein. Gemessen an den Gesamtkosten der Anlage ist der abgerufene Preis mehr als moderat. Ausprobieren verschafft Klarheit und ein Rückgaberecht gibt's ja auch noch.P.S. Alternativ hatte ich noch den Ifi iPurifier 3 getestet. Keine Veränderung der Klangqualität zu bemerken. Ging wieder zurück.

Misschien vind je dit ook leuk