Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Koppellagers voor fiets, taps toelopende rechte voorvork, stuurpen, headset, fiets, bovenkap, expander, headset, vervangende fietsaccessoire voor mountainbike, 4456ST fiets en reserveonderdelen

12,99€ 29,97€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • ♬ 【Fijn werk】De fijne afwerking zorgt voor een glad oppervlak en past bij je fietskop.
  • ♬ 【Stof- en waterbestendigheid】De kap houdt stof en water weg om de duurzaamheid te verlengen.
  • ♬ 【Vrij draaien】Kan het lager tegen slijtage beschermen en vrij laten draaien.
  • ♬【Duurzaam materiaal】De headset is gemaakt van hoogwaardig materiaal, roestbestendig, robuust en duurzaam.
  • ♬【】Als je niet tevreden bent met het ontvangen product, kun je binnen 180 dagen een onvoorwaardelijke retourzending en terugbetaling aanvragen. Als je problemen hebt met dit product, kun je ons altijd een e-mail sturen. Wij nemen onmiddellijk met u op.


Productbeschrijving


fiets headset

fiets headset

Specifieke eigenschappen: Conditie: 100% gloednieuw artikeltype: Materiaal fiets-koptelefoon: AL6061 T6. Kleur: zwart. Modelnummer: 4456st. Bovenste SHIS: ZS44/28.6 Onderste SHIS: ZS56/40 (30) (de code dient voor het snel zoeken en is geen exacte specificatie. Meer informatie vind je onder SHIS (standaard headset informatiesysteem).) Gewicht bij benadering. 138 g

Pakketlijst: 1 x fiets-headset


Customer
10 augustus 2025
Todo bien excepto por que la caja venia rota,una pieza fuera de su caja y la tapa de aluminio estaba rayada
Cliente
14 juli 2025
facilità di montaggio, pari all'originale
B. Hofmann
21 maart 2025
Einbau problemlos, die Kugellager machen einen soliden Eindruck, das dürfte eine Weile halten, Einbau in 29er Hardtail mit tapered Steuerrohr
Mr. IAN K. EXTON
8 februari 2025
This headset is for frames requiring ZS44 upper and ZS56 lower headset sizes (zero stack) and fits both a tapered (28.6/40) and straight (28.6/30) steerer forks. The cups are machined from alloy, the bearings are good - no play or problems out of the box - and the components all fitted together well with no play between bearing and cup or crown race. The reducer ring (anodized red) for straight steerer forks worked nicely - put it on the fork then the 1.5"/40mm crown race pushes onto it. As ever, the bearings in this headset will last about 15 minutes and creak a lot without grease between each of the components and all around the bearings. USE PLENTY OF GREASE!I have no idea why there are negative reviews other than people who are getting things badly wrong or because of poor frame tolerances. The Cube I fitted this headset to definitely had a slightly oval headtube so that the bearing was overly tight in the cup after fitting it into the frame. Check that your frame is definitely ZS56 and not ZS55 (some Meridas have this "standard"). Amazon sell cheap digital vernier calipers (£3) that are really useful for headset and other bearing measurement. You also can't assume that this headset is the same stack height as your old one. If the top of the fork is less than 2mm away from the top of your stem or top spacer, add another spacer or the top cap will bottom out on the fork top and not clamp the split ring into the top bearing, leading to play.
GAÉTAN LOMBARDO
13 december 2024
Mon vtt un trek roscoe 6 2021, j ai réussi à monter une fourche Rockshox "conique" grâce à ce kit. Merci je recommande