Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
Abdulla Albalushi
6 mei 2025
makes the job done fast , instead of doing your connection with the old way , just use this product and you will see how solid the connection will be.Note : you need a heat gun to use this product.
Kevin C.
21 februari 2025
These heat activated solder shrink connectors work well, making secure butt connections.Please note that the proper amount of heat must be applied to activate/melt the solder. A heat gun is essential to properly use these connectors. Please also be aware hair dryer should not be used as a heating device, as it will not provide sufficient heat to melt the encapsulated solder.Once cooled, the connection is permanent and quite strong.I highly recommend these connectors.
Josiah Volz
20 februari 2025
These are incredible. I have used these now for multiple applications, from a car to sprinkler wires to vending machines. Just carry a heat gun and short extension cord for most places and you're set. You do strip the wires farther than you usually would with a crimp. The only thing I will say somewhat as a warning is that they work way better with stranded wire than solid wire. I have had a couple instances where solid wire pokes a hole in the coupler and I have to start over. Other than that, these are easy to use, guarantee a solid connection, go waterproof, and make it so that the connection isn't a massive piece of plastic that you will be able to see even under shrinkwrap. If you cover the wire with shrinkwrap afterwards, you won't even notice that there is a splice in the wire
Chris M
11 november 2024
Works as good as described
Customer
5 november 2024
These things are so cool. Best consistent butt connection I've ever been able to make. I use a heat gun with the narrow tip. You can burn through them if you're not careful. There is a fine line between hot enough to melt the solder ring and not melt the heat shrink. Once you get the hang of it you can do it every time. I lost his the little colored ring grips the wire too. You can kinda hit that part first to help hold the wire then hold it on the solder ring. I always do another layer of heat shrink just in case I burn through the one it's made of. I will definitely buy more of these. I hope they have different types of connectors in this same style. I do a lot of diy vehicle electrical work, these are my favorite now
Aanbevolen producten