kwmobile Cat6 patch paneel 12-poorts - Cat6 verdeler voor wandmontage en serverkast - Patchpaneel - 12x Cat6 RJ45-aansluitingen - Grijs

De montagepunten zitten wat lastig achter de printplaat, maar daar is mee te leven. Verder een perfect kastje.

Bon compromis et rapide à monter

E' ben realizzato, metallo solido, connettori di buona qualità, anche il CS e' ben realizzato....però dai, per 8 cavi, 4 fascette?e no, non se ne puo usare una per fermare due cavi perche la meccanica ha un supporto per cavo, usando una fascetta per due cavi, i cavi non si reggono. CMQ fortunatamente le fascette non mi mancano.Fa bene il suo lavoro, anche se son solo un paio di settimane che e' in opera dentro un piccolo rack.Soddisfatto, ma dai, le fascette!

I got this to replace a mess of boxes and wallplates that had grown up over time that looked unsightly and was far from robust. This is much neater and should be far more rugged. The box is made from fairly solid metal. There are "fingers" to attach cable-ties to as well as metal clamps which have grounding pads exposed under them (if you are using shielded cable). so once cables are correctly secured, they really shouldn't move. All of the punch-down connections worked perfectly first time.Two minor quibbles: first - and this is completely trivial - it only comes with four cable-ties. If you are patching in 8 cables, you will need at least 8 cable ties. A (potentially) bigger problem arises with the wall-mounting options: the cut-outs in the back (third photo) will allow it to be mounted with the ports facing down but not up, or facing left (my second photo) but not right. If one of those options happens to suit your application then it's not an issue, but if you needed to wall-mount this in one of the other orientations you would need to apply some ingenuity.Overall, highly recommended.

Facile à installer et a cabler. Pas imposant. La foto dit tout

A very solidly made item which neatly sorted my cabling in the cupboard under the stairs. I like the fact it's metal rather than plastic.There was a tendency for the unit to lift off the screws mounting it to the wall as it's difficult to tighten them with the unit in place. I solved this by drilling a hole in the centre of the backplate and putting a screw through to keep it in place - see photos.The side screws holding the cover on are awkwardly positioned, but I just leave them loose enough so the cover slips on and off as it doesn't need to be secure in my case.The punch down connectors work perfectly so long as you use a proper punch down tool.I'm about to put in a couple of extra cables to other rooms, so I wish I had bought the 12 port version. ;)