La Canilla ® - Motor Voor Naaimachines 150W 8.000rpm (Zwart) | Voor Singer, Brother, Necchi, Riccar... Onderdelen en Accessoires

Installs is a couple of minutes on an old 128k.Factory foot pedal settings are rubbish, but can be changed.Open up the foot pedal, find the variable resistor (marked with VR, silver with a square hole in it just besides the micro switch) and with a small flat screwdriver turn it all the way clockwise to set for the smoothest setting..

The motor runs really smooth, silent and has more power than the original motor it replaces but...The controller is not a reostat as claimed but is a cheap 4-speed device: off, fast, very fast and burnout fast.No way to control the speed, especially slow speeds. You need to use another pedal like an original Singer to use the motor conveniently.

Funciona perfecto en una máquina antigua. Fácil adaptación y funcionamiento. No hay que ser demasiado habilidoso para poder instalarlo por tu cuenta.

A bit noisy maybe, but does the job well at a low price. Impressions are good after some hours of use, and I would buy it again if I needed another motor.

Ho pensato acquistare questo motore per una vecchia macchina da cucire; appena arrivato l'ho provato subito. Facile da istallare, e la macchina ha funzionato meglio, ho fatto alcune prove e le cuciture sono perfette. Arriva un kit dove si trova: il motore, il pedale, la cinghia, vite e 2 carboncini spazzole. Soddisfatta di questo acquisto, consigliato!!

pour le remplacement d'un moteur d'un mini tour défectueux....!

nice compact sewing machine motor and v control pedal - i installed it on a micro lathe using a belt drive to a zinc v-groove pulley x 3.5 the motor.s wheel - this, with the control pedal gives a lot of torque and jst the right speeds for all cutting operations. only pest was its anti-clockwise!!! a steel bracket was easily made and all is good in the machine bay!!!!