Leinuoses 60 stuks pin stekkers veiligheidssluitingen pin rug vervanging met sleutel

Ajusta a la perfección, queda bien sujeto. Material de b uena calidad

Most badges/pins now have the short pins sticking straight out of the back, rather than the older, more fiddly safety-pin kind of arrangement. That's great, they sit flush against whatever you put them on. However, the backing-pieces for some badges are useless at actually holding it on, especially the rubberised ones. So, these provide a simple, robust solution meaning that you won't lose your precious badges: I've replaced all my backings with these, and it also stops/reduces the amount that the badge can pivot around too.The only, tiny caveat is that, depending on the thickness of the material you have the badge mounted on, there may be a very small amount of the pin protruding from the end of the metal collar. However, they are not that sharp, but if you have badges on a pocket that you use a lot, it's something to be aware of (not an issue for me, as I never use the top pockets on coats, which is where most of mine are). I guess you could move the metal collar closer to the end, to counteract this.One tip too: It's much easier to start the small grub-screw in the metal collar if you first put it on the long end of the hex-key. Then it is easy to align it with the threads on the collar, and screw it in by maybe a turn, to start it off, all using the hex-key to hold the screw. After this, you can put it on the badge-pin and finish locking it on.

They work great one gripe is the set screws are a little tight probably would be better to use stainless steel instead of black oxide. If you have big hands buy a hex driver you need the 1.5mm size I use the one from MIP but a generic tool will work fine trust me you will bend the little garbage allen key if you have big hands.

Um 2000-2002 gab es diese Dinger auch schon bei den damals großen Motorrad Versand Händlern als es noch kein Internet gab.Diese Halter sind prima um seine Anstecker, Pins nicht zu verlieren, und sind sehr gut zu gebrauchen.ABER, wer braucht gleich 60Stück? Preis-Leistung bei weniger Stückzahl eher schlecht.

Permet de tenir parfaitement les pin's achetés avec des embouts caoutchoucs pas terribles. Éléments tout à fait conformes à la description faite. Je recommande vivement.