Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Logilink USB 2.0 3.5 SATA HDD zilver zonder schroeven

10,99€ 24,95€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Voor het aansluiten van 8,89 cm (8,89 cm) 1,5G/3G/6G SATA harde schijven
  • Compatibel met USB 3.0 (5 Gbps), USB 2.0 (480 Mbit/s) en 1.1 (12 Mbit/s)
  • Compatibel met Windows 2000/2003/XP/Vista/7/8/10
  • Met aan-/uitschakelaar, externe 12V 2A voeding meegeleverd
  • Afmetingen: 190 x 115 x 33 mm. Gewicht: 160 gram


Productbeschrijving

1 x USB 3.0 hoes, 1 x USB 3.0-aansluitkabel, 1 x externe voeding (12 V 2 A), 1 x gebruikershandleiding Ideale bescherming voor je SATA-harde schijf. Externe LogiLink behuizing voor inbouw en werking van 8,89 cm S-ATA harde schijven standaardformaat, compatibel met alle laptopharde schijven. De aansluiting gebeurt op een pc of laptop via de snelle USB 3.0-interface. USB is de afkorting voor Universal Serial Bus en werkt met een USB 3.0-overdrachtsnelheid tot 5 Gbps. De verbinding is zeer eenvoudig en het apparaat wordt automatisch herkend door moderne besturingssystemen. Compatibel met USB 3.0 (5 Gbps), USB 2.0 (480 Mbit/s) en 1.1 (12 Mbit/s). De set bevat: 1 x USB 3.0 behuizing, 1 x USB 3.0-aansluitkabel, 1 x externe voeding (12 V, 2 A), 1 x handleiding (mogelijk niet beschikbaar in het Nederlands). niet beschikbaar in het Nederlands). tegen hen. Kan worden gebruikt. Zij gelden ten minste voor de regio van de Bondsrepubliek Duitsland. Informatie over het bereik en de inhoud van de respectievelijke garanties vind je onder de garantievoorwaarden van de respectievelijke fabrikanten, die samen met het koopartikel in tekstvorm kunnen worden overgedragen of bij de fabrikant In samenwerking met ons heeft u de wettelijke consumentenrechten, die op geen enkele manier worden beperkt door de garanties. Als instructies in de en of informatie over een CE-markering zoals "CE goedgekeurd", "CE-markering" of iets dergelijks worden gegeven, wijzen wij er uitdrukkelijk op dat een CE-markering geen onafhankelijk afgegeven certificaat of goedkeuringszegel is, maar slechts een verklaring van de fabrikant, de handelaar of een goedgekeurde EU volgens de EU-voorschriften. 765/2 008 met de inhoud dat het product voldoet aan de toepasselijke eisen van de Europese Gemeenschap voor harmonisatiewetgeving in zijn toepassing. De set bevat: 1 x USB 3.0 hoes, 1 x USB 3.0-aansluitkabel, 1 x externe voeding (12 V, 2 A), 1 x handleiding (mogelijk niet beschikbaar in het Nederlands). niet beschikbaar in het Nederlands).


Kunde
16 juli 2025
Ich bin rundum sehr zufrieden über das Produkt, funktioniert einwandfrei.
BELHACHE
8 juli 2025
3 boitiers achetés chez divers fournisseurs. Les alimentations des 3 boitiers ont cessé de fonctionner au bout de 1 mois
Fredrik
29 april 2025
Working great in Linux.
katrin J
16 april 2025
Habe mist gekauft wenn man nicht lesen kann .:) leres gehäuse naja muss noch was dazu kaufen ..
Christian Krabbe
23 januari 2025
Let me tell you why I got these new ones first. There's a bit of a backstory. I have an (just one) older LogiLink UA0107 and I have a few disks I use with it. It has a miserable design for swapping disks. Tiny screws holding on to plastic, is a recipe for disaster. The screws finally ate all material to hold onto so it's no longer "safe" and the part that attach to the SATA disk is now just hanging loose, flapping about. Anyway, as for the functionality of the old one, it was great. It still works with the caveats I mentioned. I formated a couple of drives (precisely four) using my NAS using EXT4 (only other option is FAT32, which would be rather stupid for 4 TB drives).Then I receive the LogiLink UA0276. I thought, easy peasy, release the drive from darkness and pain, plug it into the new enclosure, and... nothing. EXT4 is I guess not supported by the enclosure, so now I have to upload via the old UA0107 to my NAS, remove the disk from the old enclosure, place it in it's new home, delete the partitions, format it (and use GPT, not MBR!) to NTFS, plug the drive into the NAS, then I can save the data back to the drive. It's just such a messy procedure.I don't have a linux box, but I kind of expected that the USB enclosure, at the very least, would have the same capabilities as the old. But you know what they say about assumptions.Now it is indeed made of cheap plastic, the on off switch is more flimsy than it looks on the graphics, but I actually really like it. Disk is easily installed. And in my case it's just to hold backups of pretty safe data already. I'm not going to throw it around, it's stored in bubblewrap and a plastic bag and for this purpose it appears as an OK solution. A bit stupid with the limited capability with a widely used filesystem, but whatever. It says on the box that it works with many versions of windows, and as far as that goes it appears to be true. I was just surprised.This hassle with the transfer of data is fortunately limited to four 4TB drives. But each drive needs a upload-download-time of 12 hours... so yes, it's not negligable.This hardware filesystem limitation takes it from four stars to three.