M.2 NVMe SSD-Clone-station voor M.2 PCIe, M-Key, USB 3.2 Gen2 x 2 20 Gbps docking-station, 60 mm stille ventilator, voeding

Kloon station werkt goed, handleiding is wat bekrompen en niet helemaal duidelijk, maar na wat proberen was het kloon proces gestart. Als proces klaar is kan station uitgezet worden en kan gekloonde schijf geplaatst worden, laptop startte gelijk goed op! Draait stand alone, geen PC koppeling noodzakelijk.Enige wat nog handmatig gedaan moest worden is het uitbreiden van de gekloonde partitie met de extra ruimte. Nadat dit was gebeurd was gekloonde schijf helemaal werkbaar.Eventueel verbinden met PC om schijven uit te lezen kan via meegeleverde USB C kabel.

用途は主に3点NVMe M2 SSDをUSB経由の外部ストレージとして使う他のPCで起動ドライブとして使用しているストレージのディープメンテナンスオフラインクローン作業で同容量以上のストレージに移し替える共にオペレーションはわかりやすく冷却ファンもオフ、低速、高速と物理スイッチで選択できるまたファンと付属のヒートシンクにより発熱の大きいストレージでも速度低下を気にせず作業が進む縦型配置で設置面積も小さく置き場には困らないが高速デバイス故のケーブルの硬さはあるデータの転送は高速でありがたい見た目も良く満足している

I seldom go into the performance because unless one can validate every component used can perform at the optimal 40Gb, then honestly it is a moot point. All I can say is that to clone a standard 1TB (480GB used) 2.5" SSD drive vs a Nvme 1TB with the identical data used. This one finished about 20% faster than my old Sabre 2.5" SSD clone dock. That is good enough for me. We are going have to trust that the vender can achieve promised speed at the lab. It is a little expensive, honestly, It does do what it promised to do which is clone another drive. SSD runs hot even with the heatsink and fan running. The temp tests was about 62C, maybe my house is hot as well. Anyways, I was able to test cloning TB NVMe drives, it does work without PC. Works for me and well.

全く問題なく使えた。５００GB起動NVME同サイズへクローンでラフな計測だが１７～１８分で完了。取説ドイツ語と英語。そもそも簡単な機能なので英語でも十分理解できるはず（英語自体一部トンチンカンだったが）。駄目なら日本の販売会社が作らして諸々価格に乗せたもので我慢するのが吉。FANは静か、そもそも風量が微々たるもの。だが透明煙突の効果抜群でよく冷えるから、全くアチチが無かったので安心して使える。まだ１回しか使用してないので耐久性が不明、よって星一つ落としておく。

This review is for the "GRAUGEAR NVMe M.2 SSD Duplicator Dual-Bay Offline Clone Tool-Free, 20Gbps USB C to M.2 SSD Drive Cloner Docking Station Adapter Enclosure for M2 SSD Hard Drives M-Key" that I ordered via the Vine program.I've been looking for a NVMe cloning/docking station for a while now and this one seemed to have the features I wanted. It has recognized and provided access to any NVMe drive I've plugged into it. Access speeds have been acceptable but not record setting. I haven't tried the offline cloning function so I can't speak to that.I did notice that the drives get very warm under heavy use, particularly when not using the included heat spreaders which are very fiddly to work with and are secured via rubber bands. I was hoping that the fan setup with the clear surround would provide decent cooling, but it didn't seem to make a noticeable difference.Overall, the unit is light weight and cheaply made. I don't see the support tabs lasting very long unless extreme care is used when inserting or removing the drives. The clear tube simply sits on top of the unit rather than physically connecting in any way. The dock does come with everything needed for use, but the heat spreader solution seems like an afterthought.The unit certainly provides an easy-to-use dock for quick access to drives not installed in a device which is what I mostly need it for. I'm wary of its build quality but only time will tell how long it lasts. I was hoping for a better cooling solution, but so far, the drives haven't gotten warm enough to thermal throttle during use. So, based on my experience, I can still recommend this device.

長年HDDのお立ち台を愛用してきたのですが、当然あるはずのM.2 SSDのそれの存在を忘れていました。実際の使用感はほぼ同じですが、重量が圧倒的に軽いので取り扱いも圧倒的に楽です。残念ながら試用できるSSDが一枚しかないので、それぞれのスロットでの動作確認のみ。クローンは未検証ですが、放熱も全く問題ありませんし、今後M.2 SSDの低価格化が進むにつれて、データ保管庫としてもこちらに移行するのは間違いないなと確信しました。データ転送が高速で大容量なためか、USB3の干渉問題はそれなりに発生するのが残念ですが、それ以外は問題なし。M.2 SSDの時代は下手するとHDDより長く続くと思うので一台持っておけば末永く活躍してくれそうです。