Simplemente Genial! Ligero y Robusto, excelente

Robusta y bien diseñada.Un estuche confiable y duradero para proteger tus valiosos equipos de DJ durante el transporte.

Satisfied so far, have only had it for a week. Decent protection for the price. I would not be too rough on it, or transport with anything else on top of the case. Tip on set up: The case has two layers of pick and pull foam. Top layer is 1 1/2", bottom layer is 1". Check the height of your equipment before you start picking. I did this by removing the top layer, placing my Pioneer DDJ 800 on the bottom layer, closed the lid and move the case a bit to check fit. I had some movement, so I removed the bottom layer and placed the 1 1/2" foam on the bottom, when the lid was closed, there was no movement. Then I placed the 1" foam as the top layer, placed the controller dead center, traced with a black marfer. Then pick and plucked the foam, place the controller. Better to have it a bit tight. Close the case and latch it, gently tip it upright and check for movement. If you still have movement, add another piece of 1/2" foam.

Je les acheter pour mon contrôleur DDJ SX2 PIONEER c'est nickel .Attention il vous faudra découper la mousse à la taille de votre contrôleur .C'est une mousse avec plein de petits carrée à couper au cuter bien prendre le temps pour qu'il soit bien caler dedans une fois couper c'est top .

I like the product as there is no specific case for the equipment I have - you can adjust this to protect your equipment