Makerfire 16 AWG siliconen gauge-draad, zacht en flexibel, lage impedantie (2,5 m zwart, 2,5 m rood)

Used for rewiring a lancer tactical airsoft m4, thicker guage than previous/standard wire so it was trickier to run through the rif and harder to get neat solders onto the deans connector but at the same time it is so flexible so when folding into the buttstock with battery it moves easily and the coating is very durable.Rif is performing incredibly consistently now where previously there were constant trigger response issues so It's clearly been a great investment!

My Jimny has 2 led spot lights. They are wired into the full beam via a relay. One had stopped working and one was not fully illuminating. They were wired together and then into the relay and earth. Wiggling the earth made the illumination of the poorly performing lamp ok…so it looked like I had connection issues. Checking I found that the recommend gauge for spot lights was 16 gauge, I ordered the wire. It arrived 1 day earlier than expected. The wire is flexible (silicon outer) easy to cut and trim back the outer. I made up replacement lengths for the lights and loose fitted to test to see if the other light would work - and it did. Made all connections permanent and tested ok post instal. Note - I did use previously purchased automotive bullet connectors etc to join the wires.

Great item, would highly recommended

TUTTO SOMMATO IL CAVETTO è BUONO E FA IL SUO LAVORO. NON L'HO TESTATO PER LE GRANDI TEMPERATURE MA IL SILICONE SEBRA AL TATTO BUONO, IO L'HO USATO PER SOSTITUIRE ALCUNI CAVI DI UNA CENTRALINA PER FAT BIKE. PER LA SPEDIZIONE AMAZON(COME SEMPRE) NON DELUDE MAI

Ottimo fili con una guaina di qualita resistente a temperature di 200c perfetti arrivano sia rosso e nero