Mark Vitow TCK3 Kruiskop verchroomd tik conversie kit Kruis 0.5-Inch ZILVER

Kon de oude vintage kraan hiermee repareren. De maat 1/2 inch was een gokje. Deze set ziet er bijna hetzelfde uit als de originele knoppen van mijn kraan.

Bought 2 sets of these, one for sink and one for bath. Although the bath is a 22mm feed it turned out that the tap fitting was 1/2 inch. Arrived and got them fitted in less than 24 hours. The original taps were a good brand and expensive. Considering the cost, visibly there was little difference in quality. The chrome sleeve covering the valve is lighter in weight but once fitted looks good. The only part that is of noticeably cheaper quality is the screw that holds the cross handle on. I tightened it as much as I dare and hope it does not come loose. I may get some better ones. On one of the taps there was a thin disk of metal in the thread with the screw inserted. At first I thought someone had deliberately fitted it because the screw thread was loose but it secured with it removed so must have just fallen in during assembly.IThey worked well with a nice smooth action.I will have to see how they last but so far very pleased.

This product replaces the brass valve, chrome cover and chrome tap handle. It’s fits 1/2 and 3/4 tap housings. Also comes with spacers for those deeper taps. I’ve been looking for this type of replacement valve for a while. Highly recommended.

Product arrived well packaged and in fantastic condition. The taps are of a fantastic quality and ready for quick and easy installation. Unfortunately I failed to check my taps size and ordered the wrong size.

Nice product- I recommend pairing these (as I did) with ceramic valves rather than the old fashioned ones that these tap heads come with. There are 20 cogs per spindle if you are interested. Good luck!

Used to replace worn lever on a kitchen tap. Cheaper than replacing the whole unit.