Buono e solido, facile da montare , ci stanno comodamente 4 biciclette Io l'ho montato sul gancio del camper e funziona benissimo, Unica cosa e la lunghezza dei cablaggio verso la presa che se fosse 10 cm più lungo sarebbe meglio. Lo consiglio come rapporto con il prezzo pagato.

Easy to assemble. Really great.

Die Teile waren ordentlich verpackt und nach gründlichen Studien der Anleitungen in 2,5 h zusammengebaut.Die Einzelteile waren von sehr guter Qualität.Die Aufbauanleitung ist gewöhnungsbedürftig und man benötigt Werkzeug.

Matériel arrivé en mauvais état, Support de boule lourd et mal protégé, les transporteurs ne ménageant pas les colis y sont pour partie. Résultat : Support de plaque cassé, 1 feu détérioré, peinture du support abîmée.Le fabricant devrait mieux conditionner ce support de boule dans l'emballage.A part cet inconvénient, très bon support, solide, un peu lourd.

As a 4 bike rack generally good.Aluminium extrusions are tough and a decent length.Plastic end caps are a fiddle and I can't imagine them taking much to break through general use.Once on the car it was sturdy enough - the extra straps to attach were just about long enough (is on an s-max). The front bike is a bit close to the car boot - but that's as much to do with the shape of the car.You need a 24mm socket (well - only one i had was 15/16ths) or decent spanner to attach the clamp onto the tow bar. This is a bit clunky and definitely easier with two pairs of hands.Assembly is a bit of a faff. Instructions are not bad but it takes a little while to work out what actually goes where. Took me a good hour going steady and only tightening when I was sure things were right. Even then I took the front rail back off because it would be better to have the electrics over the top of the frame rather then trailing underneath. For tools you need two x 10mm, 2x13mm and a fiddly little 6ish mm for the lights.By far the biggest flaw though is the plastic light guard/ bumper. This is blow moulded plastic and very flimsy. It was already cracked slightly when it arrived (and there was no sign of rough handling in transit). It must have cost literally a pound to turn out in volume. In brilliant Italian design sense this is also the lowest part of the assembly at the rear - so every time the rack is off the car (which is probably going to be the majority of the time) you are going to be standing it on this flimsy frame.Having saved money on the manufacture of this part it would have been good if there were clips to hold the number plate in place on it - but there aren't - so you have to come up with your own plan (whether that's double sided tape or drilling holes for bolts).Overall not bad for the price for a 4 bike rack and delivered on time / well packaged / with all the assurance that Amazon has.