Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
Over ons
Merriway is opgericht als fabrikant en distributeur van hardware, doe-het-zelf en meubelfittingen aan de handel voor meer dan 22 jaar. Het bedrijf omarmt de waarden van concurrerend op een breed assortiment ondersteund met grote voorraden.
Ons pand is meegegroeid met het bedrijf en bestrijkt nu een vloeroppervlak van meer dan 50.000 m², terwijl onze personeelsnummers dicht bij 100 personen.
We hebben ISO 9001-accreditatie (ISO 9001 in juli 2011) bereikt, een upgrade van onze vorige status van ISO 9002, waardoor goedkeuring werd ontvangen voor de kwaliteit van onze managementsystemen, illustreren hoe serieus we deze problemen nemen en hoe hard we eraan werken.
Ron
21 mei 2025
I needed to mount a 9U Network Rack on my wall, 6.5ft above the floor. The Rack didn't come with wall mounting bolts, so I had to spend a few days researching how to mount this on a 6inch plastered block wall. Sadly all the examples I saw on Youtube were for mounting on wooden walls. Eventually I decided on Sleeve Anchors. Determining the appropriate anchor size was the next challenge. I needed one which will slide into the holes on the back of the rack with nuts wide enough to stay in place with the washer and long enough to extend beyond the hollow mid portion of a 6inch sandcrete block and penetrate the 2nd solid portion without bursting out on the other end of the wall. This bolt with its 4inch length was perfect for the job.The rack has been in position for 5 days now and is still as sturdy and solid as the first day I mounted it, even with the pressure I exert while installing and configuring network components inside the rack.
Atomic Frog
2 maart 2025
Used to fit a safe to a wall. Chunky bolt fit easily into a 10mm hole and tapped in with a hammer. Used insulating tape on the end so the nut wouldn't angle or work loose in the hole, partially filled with silicone sealant. Ratchett screwdriver and a 13mm socket as the access was tight.
darren nellist
27 februari 2025
Easy to use
Marc
19 januari 2025
Good Anchors we used 4x of these to anchor our Palram 6ftx5ft shed down which had anchor holes preset into the bottle of the frame in 4 corners.The sheds survived high winds and is still standing absolutely fine the issue i think with PVC sheds is people just put them up and then fill them with grear thinking it will be enough... they are wrong the wind will destroy the shed or slowly reduce the ridgidity of the frame until it falls apart.These work well for palram sheds!If i was being a little bit anal about it I'd have maybe preferred something longer but to be honest these are absolutely fine.
@piccolofurgone
22 november 2024
Ok, but struggled to get them to bite into the concrete and did not appear to be the best quality.
Aanbevolen producten
Misschien vind je dit ook leuk