Mioke Autokoplampfolie, 300 x 30 cm, getinte folie, sticker, koplamp, mistlamp, achterlicht, vinyl, kleur accessoires, zwart

Impossible to get a smooth finish on this film even with heatgun and proper prep/cleaning. You will get bubbles and creases

Parfait conforme à la commande et rapide

Dès qu'on chauffe le film,il se déchire ou ne colle plus, mauvaise qualité

Ottimo prodotto

Diese Mioke Auto Scheinwerfer Folie hat meine Erwartungen übertroffen! Die Qualität des Vinyls ist ausgezeichnet, und die Größe (300c*30cm) reichte mehr als aus, um meine Scheinwerfer, Nebelscheinwerfer und Rücklichter zu bedecken. Die schwarze Farbe verleiht meinem Fahrzeug einen sportlichen Look, den ich liebe. Die Anwendung war auch sehr einfach. Die Folie war gut geschnitten und ließ sich leicht auftragen, ohne Blasen oder Falten zu hinterlassen. Ich bin wirklich zufrieden mit diesem Produkt und kann es jedem empfehlen, der sein Fahrzeug optisch aufwerten möchte.

Long time buyer, first time reviewer!Honestly this product essentially drove me to do this review because I wanted to make sure its represented correctly after what I can only describe as a pretty much seamless experience!Now my expectations were simple, I have some lights, that were faded, or slightly discoloured and I wanted a tint that's light enough but at the same time sturdy enough to get around these new fancy headlights that feel corners are a must ( Anyone who owns X5's will respect the boot light fading!)I had read this and other product reviews, some saying it scratches, problems applying etc... honestly for this reason I bought 2 rolls as I expected I may lose a piece or two.Every piece worked great, I pulled the side protecting the glue as I was going along, a little hard to start but once you have worked out a routine I found it simple. For me the side protecting the sticky was on the outside of the roll, that may help others if all manufactured same way.Applying it, on straight pieces.. a breeze, it just stuck as I applied it, no hassle, and if you got a trapped bubble.. you could peel it back up. As you can see though my lights as I got to the main units are anything but straight. Heating it, again simple, a little bit softer than I had experienced before with Vinyl for interiors but still easy enough and I found it malleable enough to do a 3 way curve. I had to stretch fit at one point, heating and lowering... again no issues with this.Finally when its all done, cut into shape, the now ' top layer' can be removed.. you either find a little bit that's bubbled up, or I scratched with my fingernail a little until it did, and again the top layer comes off, giving you a fantastic finish.I did use a vinyl scraper with a microfibre cover on one end ( not the included tool ), and it did look like it was leaving micro scratches as I was applying it... obviously this was the third layer in my case and removing it, made my lights look like new ones.The size of roll is good, I cut the shapes out beforehand as squares within a 2-3cm tolerance, and measuring it looks like I have enough for both front lights too. Its not a promise it will cover all cars, but I was impressed by how much you get.Hopefully this helps others who might be on the fence deciding, because I found this to be a bargain deal, I was expecting many more problems with the quality that just didnt surface for me