Montagebeugel voor temperatuur- en vochtigheidssensor - ZSE44 - Zooz

Great quality. Solid connectivity (800 LR!). Super easy to connect, great battery life, and a good value. I've bought several and I'll keep buying Zooz stuff. (Hubitat HE system)

ZOOZ always works

Zooz makes high quality products that integrate well with my Hubitat Z-Wave C8 Pro hub. The drivers available on the Hubitat make it easy to calibrate the sensor and it provides reliable readings. Placement is critical. We moved a large outdoor plant in an urn underneath the sensor and now the humidity is elevated! Will be relocating the sensor as a result.

It drained the battery for a bit over a month. Enough, so I cannot return it.The update rate is also terrible - 4 hours !?I tried to changed it from the Home Assistant, but was not updated on the sensor.

I bought this as an outdoor thermometer to trigger my outdoor z-wave switches for my heat tape (to prevent ice dams in winter). It’s one of the only temperature sensors I could find with an operating temp range down to near zero degrees Fahrenheit, which our outdoor temps temps can reach here in winter. It came up easily on the SmartThings “add-device”, but came up as a generic multi-sensor first. But Zooz gives you easy instructions to add and select a different “driver” for the device, which then has it only showing temperature, humidity, and battery. I did notice the battery, which read 100% at room temperature, read only 75% at freezer temp.I did not change any of the default parameters like how often the device wakes up to report, which the instructions state would lower the battery life. But for my application, it reports sufficiently fast. It appears that every time the temperature changes a certain number of degrees, it reports independently of the auto-wake function. So it’s not instantaneous, but the outdoor temperature does not change instantaneous. I put it in my freezer to test, and it took several minutes both for the device to cool to freezer temp, and to report the correct degrees. It reported multiple temps on the way down to 7.1 degrees. Likewise, when I took it back out to room temperature, it took several minutes. The readings were very accurate to other thermometers in the room.Overall, I’m extremely happy with its small size, ease of inclusion in SmartThings, and accuracy. We will see about battery life. It’s supposed to be placed outdoors under an eave, and not in direct sunlight or exposed to frequent water.