MOSHAY Roll Over Afbeelding om in te zoomen, fietstrainingswielen past op 16“, 18“, 20“, 22“, 24“ kinderen, variabele fiets (zwart)

Se ajustan perfectamente

Tried 3 different stabilisers all flimsy and unbalanced before coming across these. Really sturdy and do the job! Forget the rest these really are the best.

Broke within a day of daughter using them

Top und die material Qualität ist auch gut.

The negative reviews on here are largely down to user error, but hardly their fault because there are no instructions.If you are looking at these, it is probably because it is for a bigger kids bike that might have gears. That is why one of the arms is a different shape, because you off-set it with the spacer bolts so it is away from the gears and mechanism.The spacer bolts are M10 with a 1.0mm pitch, which is standard for most bicycles. The spacer bolts are poorly made by someone who needs a new tap and die set. I found that threading them into each other with a bit of force and grease/WD40 sorts them out and then become much easier to work with.IF YOUR BIKE HAS A QUICK RELEASE WHEEL you will need an M10 to M5 fine thread adaptor. PATIKIL sell brass ones on Amazon in packs of 5.I have not fitted them yet because I am waiting for the thread adaptors, but they seem fine and sturdy. I would recommend using some insulation tape or something on the frame of your bike where the support arm makes contact. I have gone early with this review to hopefully help someone who is struggling.Update: I damaged the quick release. It isn’t strong enough for this. If you have a quick release you will need to replace it with a solid core rear axle, probably 180mm one, not expensive, just time consuming.