Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

NB North Bayou Laptop Stand met Verstelbare Lade voor 10-17 inch Notebook, Monitor Arm voor 17-30'' Computerscherm, Max Load 9kg Laptop Mount H100-FP Wit

26,99€ 50,99€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Parameter - H100-FP als 2-in-1 monitor/laptoparm past op 10"-17" notebook en 17-30" computermonitor, belasting van 4,4 tot 20 kg, VESA 75x75mm & 100x100mm
  • Aanpassing aanpassen - Ingebouwd met ultra-precisie gasveerpoot, maakt +85° tot -30° schermkanteling mogelijk, 360° rotatie voor landschaps- of portretmodus, rechtopstaande lift 10" (260 mm), maximale horizontale verlenging 560 mm en +90 tot -90 graden draaibare engel, houd uw monitoren vast met een ongeëvenaard bewegingsbereik
  • Ergonomie - Met behulp van de robotarm om het scherm (hoogte en hoek) aan te passen aan onze houding, om ongemak in de wervelkolom, nek en schouders veroorzaakt door langdurig werk te verminderen, geleidelijk onze algehele gezondheidstoestand te verbeteren, geniet ervan, beginnen!
  • Georganiseerd beheer - De monitorsteun is ook ontworpen met een kabelbeheerfunctie - kabelsleuf kan draden leiden, de kabel georganiseerd en beschermd houden, ruimte op het bureau vrijmaken en rommel verminderen
  • Eenvoudig te installeren - Pakket met gedetailleerde instructies en alle benodigde hardware. Installeer eerst de productstoel aan het bureau of de muur, ten tweede, monteer uw monitor op het product, ten derde, Duw de arm naar beneden, het zal gemakkelijk zijn om deze spanningsschroef dienovereenkomstig aan uw monitor aan te passen (Pls pas de spanningsschroef NIET aan zonder de monitor erop)


Productbeschrijving


H100FP0W1

NB Ergonomic is een professionele leverancier van Audio Visual randproducten en ergonomische oplossingen, toegewijd aan dergelijke producten om mensen te helpen de gezondheid, werkefficiëntie te verbeteren, om een veiligheid en comfort werkplek te creëren.

H100-FP White 2 in 1 monitorarm kan worden gebruikt voor Laptop Stand en Monitor Arm, voor 10.17'' laptop of tablet, of voor 17.30'' computerscherm, max lading 4.4 m 19.8lbs 2.9kg, VESA 75 x 75mm tot 100 x 100mm

Attentie:

1) Terwijl als uw VESA-gat zich in een recessiegebied bevindt, moet u er rekening mee houden dat de grootte van de gehele VESA-plaat van dit product 120*120mm is, extra langere schroef-afstand kan nodig zijn om het goed te laten passen

2) USB-kabels worden niet verstrekt, het USB-gat op de basis is alleen voor DIY-doeleinden

3) Monitorkabels en kabelbinder worden niet verstrekt

4) Pas de spanningsschroef niet aan zonder de monitor die erop is gemonteerd

H100HFP01
H100HFP013

  • Max hoogte van VESA centrum tot het bureau is 22.4inch (570mm) biedt u keuze van de beste positie zoals u wilt
  • Max Extension aanpassing tot tp 22,1inch (560mm) helpt u de afstand tussen laptop en u aan te passen
  • De rechtopstaande aanpassing van laptopscherm ongeveer 10.2inch (260mm) brengt u ergonomische kijkhoogte
H100HFP014

  • Koeling Ontwerp: Ventilerende gaten van de lade voorkomen dat uw laptop verwarmt en is goed voor warmteafvoer
  • Ruimtebesparend: laptophouder met lade maakt bureauruimte vrij en maakt het werkgebied overzichtelijker en schoon
  • Gasveer: Ingebouwde hoge kwaliteit gasveer is duurzaam en verstelbaar, biedt ondersteuning voor laptop montage
  • Torque Adjustment: "+" Torque verhoging richting wanneer laptop naar beneden valt en "-" Torque vermindering richting wanneer laptop omhoog gaat
H100HFP015

Met behulp van de robotarm om het display (hoogte en hoek) aan te passen aan onze houding, om ongemak in de wervelkolom, nek en schouders veroorzaakt door langdurig werk te verminderen, geleidelijk onze algemene gezondheidstoestand te verbeteren.

Geniet ervan Begin!

H100HFP016

K
14 april 2025
I have a lot of monitors at my desk, in addition to a bunch of figures, accessories, and decorations. This doesn't leave me with a whole lot of free space, which led me to pick up this mount. Previously, I had been using stands, which were fine but took up a lot of desk space. Since this just mounts to the side of the desk, no issues there. Putting it together was really easy, and it's very sturdy so I'm not worried about my laptop falling off. I loved that it was offered in white, as a lot of stands seem to only be offered in black for some reason.
David V.
30 maart 2025
Lo tengo para soportar un Laptop extra y funciona de maravilla, puedes ponerlo en cualquier posición, es robusto, etc. Muy buena compra.
Aberdeus
24 maart 2025
First off its really heavy so like the title said mount it on a solid surface. Its very well made and sturdy, its design ignores the typical 3 point bend but what it goes with works well and is easy to set up.
Zauberspatzl
15 januari 2025
Leider ist die Aufbauanleitung nicht sehr gut und nicht in Deutsch. Aber die Qualität ist sehr stabil.
noc
22 november 2024
This is a well-built monitor mount/arm assembly that so happens to come with a laptop tray, so they advertise it as a laptop mount. The cable routing features are easy to work with, unlike some monitor arms I've worked with. My only gripe with the assembly was that the main tensioner isn't accessible until you actually bend the the arm -- you might as well mount it first before messing with the tensioner screw, because it takes a lot of force to bend it prior to mounting.As for the laptop tray, I have two main concerns. The tabs that insert to install the side clips into place are small and fragile. As such, be mindful of what ports you need on the side of your laptop before installing them. I had to use a flathead to pop the clips back out after realizing I needed to access my ports, so I put the right-hand side lower on the tray than depicted in the instruction manual. The second concern is the knubs that hold the laptop up -- they don't actually protrude as much as they seem to from the product photos. Alas, since it's only attached with a screw, it is removable and you could 3D print your own if they ever fail or if your laptop is too thick for comfort.