Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

NEIKO 20687A Kogelgewricht Separator Trekstang Remover Augurk Vork, 5-delige Set

30,99€ 58,22€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • TOEPASSING: De kogelgewricht separator wordt gebruikt voor het scheiden van het kogelgewricht van de spilsteunarm op voertuigen met voorwielaandrijving, zowel binnenlandse als invoer.
  • KWALITEIT: Deze set wordt geleverd met een constructie uit één stuk gelegeerd staal die duurzaamheid en sterkte garandeert om de zware hamerkracht te weerstaan die wordt overgedragen aan auto-hulpstukken in uw garage of op het werk.
  • ONTWERP: De gekartelde handgreep zorgt voor een sterke, strakke, gecontroleerde en goed geplaatste grip bij het hanteren van de separator op olie- en vettige oppervlakken in autowerkzaamheden en zorgt voor precisie en nauwkeurigheid bij de toepassing ervan.
  • Duurzaam: de warmtebehandelde taps toelopende vork scheidt soepel kogelgewrichten en glijdt tussen de bal en de behuizing, waardoor het gemakkelijk is voor onderhoudstaken en autoreparaties aan de meeste autovoertuigen.
  • VEELZIJDIGE GEREEDSCHAPVORK: Het augurkvorkgereedschap in deze autocollectie varieert en is verkrijgbaar in 5 maten, waardoor het bruikbaar is voor een verscheidenheid aan pitmanarmen, kogelgewrichten en trekstangen van auto's, waaronder auto's, vrachtwagens en SUV's.
  • GEMAK: Deze 5-delige set wordt geleverd in een slaggegoten plastic koffer voor organisatie, draagbaarheid en gemakkelijk transport, en heeft verschillende maten, waaronder: Open maat - 11/16", 15/16", 1-1/16", 1-1/16", 1-7/16", en 1-1/16". Diepte: 2-3/4" (69. 9 mm), 3 inch (76. 2 mm), 3-1/8", 2-3/8" (60. 3 mm) en 2-7/8 inch (73 mm)


Productbeschrijving

De Neiko 20687A kogelgewrichtscheiderset bestaat uit de volgende augurkvorkmaten: Open maat - 11/16", 15/16", 1-1/16", 1-7/16" en 1-1/16". Diepte: 2-3/4" (69. 9 mm), 3 inch (76. 2 mm), 3-1/8", 2-3/8" (60. 3 mm) en 2-7/8 "(73 mm). Wordt geleverd in een geblazen plastic koffer om augurkvorken georganiseerd te houden.


Luis Gerardo
4 augustus 2025
Excelente producto
Cat
27 maart 2025
Tough forks. I used them to break my ball joints loose and pounded them with a hammer. They got the job done and took the abuse.
DZ
24 januari 2025
Alright at that price range this is more for the value, don't expect OTC quality but still you can't go wrong on a full set for cheaper than one pickle fork from any of the big tool truck companies... the carrying case is pretty good too... if you only need them personally or for light uses this is the set for you.
Marcus carr
18 januari 2025
nice little set great price helped get the job done actually used them to help get my upper control arm bolts out because they were rusted and swollen in the bushings and wouldn't come out
Valerie
19 december 2024
I used these to change the inner and outer tie rods ends and adjusters on both sides connecting the center drag link with the idler arm and bracket to the link and the pitman arm to the steering gear box to the link, The studs on the idler arm and pit man arm was seized to the center link... i used these to beat the beep beeep beeep beeeep out of them with my trusty 4 pound husky hammer never had to use a full size sledge on them yet but i am sure they would take it, they took quite a few heavy blows over and over and over repeatedly until i finally was able to take a 3 foot pry bar and wedge it between the pickle fork and put all the pressure i could with my body weight on the fork to pop that pitman arm stud free. I wouldn't have been able to do it with out them, They are a good cheap set that will get the job done for the price, Looking forward to beating them to death for the rest of their life i don't feel like i buggered the hammer side ends up to bad from hamming on them so they will most likely be used over and over again they can be hit hard and the fork heads held up great. they work going give them a 5 star because i know how much work they saved me lol.