Noctua NF-F12 iPPC-3000 PWM, Koeling Ventilator voor Intensief Gebruik, 4-Pins, 3000 RPM (120mm, Zwart)

Die dingen trekken mijn PC ijskoud!

These fans are amazing. If all you care about is performance these are for you. I have 3 of them on my Kraken Z73 thats connected to my RTX 2080 Super. These keep the card under 40c for the most part while gaming. While at max load they can be loud, they are very strong fans for radiators. With their high static pressure and 4 Pin PWN connector, they were a simple swap from the original NZXT fans.So basically, if you want performance and dont worry too much about sound, these are great, even at lower speeds these pull a lot of air.Highly recommend.

Another excellent product from Noctua as usual. They are fairly loud above the 2000rpm range, up to their max rpm, but I think that that is to be expected of course. I actually find them to be quieter than what I was expecting them to be at/near maximum rpm. They also actually seem to be a bit quieter up through the same rpm range as my last NF-F12 1500rpm PWM fans. I run 2 of these 3000rpm fans on an AIO closed loop liquid cooler (240mm rad). They've lowered my CPU temperature several degrees when the processor (Core i7 - 4770k) is working hard, and they provide a very stable and lowered temperature under moderate loads. I was running at an observable 32*C avg. near idle (800mhz) with the previous model of Noctua fan and am now running at 29*C avg. at idle (25.5*C ambient room temp.). I'm not sure what's different about the design between my previous model and this industrial model, which would allow for a cooler idle temperature, but something has changed and given me a cooler idle temperature, as well as providing a huge boost in cooling under heavy CPU load. I highly recommend these fans if you need extra cooling capabilities, as long as you are expecting/ok with a bunch more noise in the higher rpm's. I give these a 5/5 overall. Noctua fans are awesome! Thank you Noctua and Amazon!

I have built a custom desk that fits my HP Z800 workstation and MSI gaming rig. I decided to have each side of the desk be an intake for each computer. With 4 fans on each side being powered by each PCs PSU. The Z800 with how many fans that thing has on its own it probably doesn't even need that many but lemme tell you a few things.This desk is 79.75" long. And 26" wide. That's alot of area that needs some form of airflow through it. Now on the left side is all 4 noctua indistrial 3000rpm 12v fans. The right side has 6 corsair HD120s (3 for the rad and 3 for the intake) and one noctia industrial as well.Now the corsair are some decent fans. Quiet and move a decent amount of air. I'm not very good at math but they do a pretty good job for how expensive they are.Now I heard noctua makes great fans. Alot of youtubers use them, some friends of mine use them, and it seems anyone who's anyone uses them. When I was doing testing on the computers I was EXTREMELY impressed that the noctua industrial I've purchased actuslly can move air more then 3/4ths the length of the desk. It blows the corsairs out of the water.My fan controllers are their own devices that run off the sata power cable. They weren't cheap at $67 a pop but their great quality, what I'm getting at is as the fan controller starts up their LOUD BUT once the proper RPM kicks in you can't even hear it. 3000rpm is alot and at 1200 even 1500 I legitimately dont even notice it. The corsair fans yeah I can hear them but these fans are excellent all around on efficiency. For pretty much making a blind choice of fans to buy I made a great choice.Their build quality is impressive too. They are also quite responsive too when it comes to an rpm spike or going from an idle speed to max it kicks up to where it needs to be very quickly. I honestly think any build i do from now on will use these fans now that I've actually seen the light of how great these are.Now if they coild make a delta style fan where it's got dual props on it that's as insanely powerful as those id buy them in a heart beat over deltas server fans as the noise reduction would likely be amazing.

Well made, well priced, does an excellent job as described.

Ventola estremamente precisa e silenziosa che all'occorrenza diventa efficiente ma anche ben udibile, con margini di efficienza di gran lunga superiori rispetto ad altre. La ventola che gira a 3000 rpm non può essere silenziosa ma utile in caso overclock un pò troppo spinti.Materiali di ottima qualità, la riduzione delle vibrazioni prodotte è garantita dagli ottimi supporti in gomma montati sui 4 angoli della struttura portante,ed in merito consiglierei di non serrare troppo a fondo le viti di fissaggio per non ridurre eccessivamente lo spessore dei gommini, con conseguenti rotture e rumorosità.Ne ho acquistate 2 per un dissipatore perchè quelle originali dopo poco hanno dato segni di cedimento.Con questo prodotto sono riuscito ad ottenere ottimi risultati in termini di efficienza e silenziosità, quindi temperature costanti anche durante le sessioni di gioco più impegnative con un I7 6700k che di calore ne genera abbastanza.In generale, la consiglio tenendo sempre conto di tutto l'impianto di raffreddamento sia in entrata che in uscita senza sottovalutare tutte le componenti hardware presenti nel case/cabinet.

These are honestly the best «high static pressure» fans I have ever seen.They can be used anywhere, but you need high static pressure fans if you are going to use them with a radiator/water cooling.I bought these to replace my NZXT Kraken Z73 360MM AIO's stock fans - which are not bad, but are weaker in terms of performance / speed / static pressure.I honestly expected more noise for 1800rpm, so was pleasantly surprised - I'm running 3 of them in my system and at speeds of up to 1800 rpm - the fans operate in surprising silence.· They're so efficient that even at around 50-60% (1500-1800 rpm) speed they're keeping everything cool and run virtually inaudible.· At 60-75% (1800-2250 rpm) they make a "swoosh" noise that's acceptable (and a lot better than the average annoying fan sound).· At 75%-100% (2250-3000 rpm) - we can hear a more serious noise, but I don't see the need to run it at those speeds unless you're cooling a very hot radiator.👉 It's also very important to say they look very good; build quality is impressive; the sleeved cables and anti-vibration pads are top notch.✔ Pros:+ High static pressure at low RPM (perfect for radiators)+ Focused airflow (meaning straight air path for better dissipation)+ Low noise levels+ Superior build quality / Top notch materials✖ Cons:I will update if I find anything on continuous use.Overall, I'm extremely happy and will buy again in the future.Definitely recommended!↘ ↘ ↘I rely on reviews when I make purchases, so I put a lot of time into reviewing everything I buy on Amazon.Please, show your appreciation by clicking the "Helpful" below when it asks if the review is really helpful!Thank you for your time and Have a great day!