ORAZIO Bandenspanningsmeter met vloeistofvulling, 230 psi, bandenpomp, pomppistool, luchtvoering, compressor, auto, bestelwagen, camper, fiets, bandengereedschap

Works well and already had a euro connecter

The air chuck is a design that should cleanly lock on shrader valves. I tried it on two wheels, on one it does connect and only hisses slightly when the angle is moved around. On my other wheel, the chuck does not hold on sufficiently and leaving it in place loses air from the tyre.The air hose connection is a 1/4 BSPP thread with an o-ring, but this has also been cemented in place with red thread locking material. This made it very difficult to replace with the other air hose connector which was kindly included. The two connectors appear to "PCL Standard" as the spare, and perhaps, "US Industrial 3/8" is the default one that was glued in place. See my photo to be sure.The gauge wheel has a sort of outrageous range, up to 16 bar. I haven't assessed it for accuracy. It is cemented in place with 1/4 BSPP thread, cemented in place with red thread locker like the air hose connection.The flexible hose appears to be good quality. It is attached with 1/4 BSPP thread and an o-ring, without any thread sealing material.The tool comes with a one-page information sheet, but the instructions reference the digital gauge and it doesn't say anything about the air hose specifications.All of the three hex nuts are 14mm.