Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
Beschrijving:
LCD-controllerboard:
HDMI DVI VGA AUDIO LCD Board Work for LVDS Interface LCD-scherm
Input power adapter: 12 V DC meer dan 3 A.
Kome In Standby Model Wanneer Not Input Signaal
Stand-by model Video-ingang: HDMI DVI VGA
Audio-ingang: HDMI.
Audio-uitgang: luidspreker-connector
OSD: Helderheid Contrast Auto Taal En Zo On
Taal: Engels Frans Duits Spaans Italiaans And So On
Afmetingen board: 125 x 58 x 17 mm.
Compatibel met:
17 inch 1280 x 1024
M170EG01 M170EG02 M170EN01 M170EN04 HSD170ME13
M170EN05 M170EN06 LM170E03 LTM170EX
LTM170EU LTM170EH LTM170E5 LTM170E6 LTM170E8
19 inch 1280 x 1024
LM190E02 LM190E03 LM190E08 M190E5 G190EG01
M190EG02 M190EG03 M190EN01 HSD190MEN4
HSD190ME11 HSD190ME12 HSD190ME13 LTM190EX
LTM190E1 LTM190E2 LTM190E3 LTM190E4
Inhoud levering:
1 x HDMI VGA DVI LCD Controller Board M.NT68676
1 x 4CCFL inverter-board.
1 x 30-pins signaalkabel.
1 x toetsenbord met kabel.
6 x acryl board voor NT68676
8 x M2.5 schroeven
8 x M2.5x6 koperen stick
8 x Hollow Copper Pullen.
1 x Schroef Driver
nrv
13 juni 2025
goed
D
26 mei 2025
I bought this to add hdmi&sound to an old dell monitor I had to use for my Sega mini. LCD is LTM170EU-L31. So far in the first 30 minutes of use, picture is more colorful than the original DVI controller board, OSD is in English and supports 4:3 aspect ratio, sound has good power.
daniel de la fuente
28 februari 2025
La caja viene muy bien para evitar interferencias o q toque alguna parte metálica y de falsos.Llegó muy rápidoPerfecto para controlar el panel del arcade 1up
Brendan
20 februari 2025
Very easy to setup & use, just buy 'command velcro strips' or 'double sided tape' to stick it onto the wood or MDF of your cabinet. It converts any old monitor within your arcade unit to HDMI, you can use any 5v adapter to power it on (or any arcadeup1 power supply).
Customer
9 februari 2025
Excellent board that is cheaper than others on here but dont let that fool you, even if you buy the case as well is basically then the same price as others. On the case you should 1000% get it for a few reasons. Firstly the case comes with brass offsets to attach the top of the case, what I did with one of these was to use it to attach the ground and then put the lid on after that. Also if you get the case you can attach the case to the metal part of the monitor, a couple of double sided foam squares will do fine, I then attached the control board to the lid as shown in the picture, this is important as a lot of the monitor out cables are not long enough to reach off the metal back of the monitor. It looks really nice as well. Top piece of kit!
tiziano grasselli
4 december 2024
Perfetto installato senza problemi
cfe
7 november 2024
Used with a LCD Dell 1907fp + rpi3, at first a part was missing so I contacted the seller and they send it to me at no charge, really it is a 5 STAR Seller Service, thanks to Owootecc.
Aanbevolen producten
Misschien vind je dit ook leuk
Aanbieding
99,00€
330,78€
Aanbieding
9,99€
18,50€