Park Tool HHP-3 - Home Mechanic Bearing Cup Press Tool,Blauw

Je recommande ce produit. Très simple d’utilisation, attention à ne pas trop presser le boîtier !

Niente da eccepire: ottimo prodotto che fa egregiamente il suo lavoro e permette di montareovime ti centrali press-fit o calotte serie sterzo in modo preciso e accurato. Costa ma garantisce un risultato senza intoppi, soprattutto quando si ha a che fare con bici da molte migliaia di €...

I used this to install some BB30 press fit bearings into a frame. Like others I tried the DIY approach using a long piece of thread and some washers, but I just couldn't get the bearings to go in straight. Then with each failed attempt I had to dismantle it all and punch out the misaligned bearing again! With the HHP-3 tool it literally worked first time! I'm very happy with my purchase, yes it's expensive but hopefully I'll get more use out of it in the future.One thing to note is that it didn't come with any drifts for installing the bearings. I already had some which came with a removal tool. I wonder if perhaps the 1 star review on here didn't realise you had to use drifts and was just using the washers?

Great tool for installing bicycle headsets.

I usually have my bottom brackets out 2 to 3 times a year for cleaning and lubrication or even a swap. I have been working with a homemade bearing press setup (nuts and threaded rods with washers) or a budget bearing press for years. Those setups worked but always required very very careful and slow installation. It also took multiple attempts to get the bearings in without them being cockeyed. Even when I was careful I often ended up forcing the bearings in at an angle that I was not comfortable with. It was always a cursing affair.Last week I took out my BB30 bottom bracket bearings and was having so much trouble getting them back in with my homemade press that I broke down and finally bought this HHP-3. I didn't want to mar or stretch the cups on my nice frame so I kicked down the $75 and took advantage of the free one day shipping. Lost and Found was two days away so I wanted the bottom bracket in order. I can't believe I went so many years without this tool. I had struggled for 1.5 hours to install the BB30 bearings with my homemade setup. I couldn't get them to align in the cups to my satisfaction. They just kept going in too crooked. I was even using the correct Park installation bushings for BB30. Once the new HHP-3 arrived, I greased it, assembled it and pressed the bearings in perfectly straight on the first try. It took less than 5 minutes. It was sort of a face palm moment given how much I struggled with these types of installs over the years. This might be one of the best tool investments I've made and I have only used it once. :) If you are having trouble installing your bearings straight, get this tool and get the correct bushing for install. It will make your future maintenance a lot easier. I'm looking forward to using it again.