Park Tool SG-7.2 Extra grote verstelbare zaaggeleider, blauw

Como de costumbre, una buena herramienta hace el trabajo facil y bien.

Brilliant tool and does exactly what it's meant to. I've used it to cut bars to size and it was flawless. Solid construction and looks like it should outlast me.

I bought this to cut spring spacers for motorcycle front forks, and it works great.Racetech supplies thin-wall aluminum tubing with their springs, which is cut to length according to the rider's particular application. A tubing cutter can walk before settling into a circular cut on a thin tube, and the pinched profile of the cut requires filing to get a flat seating surface. This tool makes a nice square cut and the length is easy to control.With the tool clamped in a vice by its bottom edge, I was able to cut 1-3/8" OD .049 wall tubing with a standard hacksaw (actually a nice vintage Capewell) by dropping the blade down each of the angled sides. I'm sure it would work with CPVC pipe just as well, but the thinwall tube leaves more airspace and allows me to use the Racetech oil level spec.

Bin sehr zufrieden, habe damit ohne Probleme meinen Gabelschaft und meine Aero Sattelstütze gekürzt.Hochwertige Verarbeitung, mit Kunststoff Klemmbacken, die den Gabelschaft und Sattelstütze fixieren.An meiner hochglänzenden Aero Sattelstütze sind keinerlei Spuren von den Klemmbacken sichtbar.Zu Empfehlen!

Had to buy this after replacing my forks after a crash . So easy to use thin side alloy/steel thicker side carbon. You can’t go wrong a perfect straight cut whilst holding your forks straight and secure