Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
Specificatie:
Artikeltype: module voor snel opladen
Materiaal: PCB
Ingangsspanning: DC 8-32V
Uitgangsspanning: automatisch aangepast tussen 3,3-21V bij aansluiting op Type C-compatibele apparaten met voeding (ingangsspanning moet hoger zijn dan uitgangsspanning, ingangsspanning moet hoger zijn dan 20V als u 20V snel opladen wilt activeren)
Uitgangsvermogen: maximaal 65W (5V3A, 9V3A, 12V3A, 20V3.25A, etc.)
Conversie-efficiëntie: 92%‑97%.
Rimpel uitgangsspanning: Onbelaste stroom:
paklijst:
1 x snellaadmodule
CK80
25 mei 2025
In Verbindung mit einem alten Notebook-Netzteil x-beliebiger Marke ein 65W USB C PD Lademodul.Upcycling.
J Evans
8 mei 2025
Works well. Auto-negotiations correctly based on available supply voltage and USB-C PD requests (note: 15V not supported). Board runs hot at full power, but seems safe - I used a small 3D-printed enclosure with good ventilation (slots) without issue.
X
13 april 2025
Das Modul kann 5V, 9V und 12V. Dabei werden 15V und 20V nicht unterstützt. Die Beschreibung ist falsch. Schade! Es ist ein buck converter (step down) die Eingangsspannung muss immer größer sein als die Ausgangsspannung. Für den Preis bin ich enttäuscht.
Waldemar
13 februari 2025
Wie der Name schon sagt- Quick Charge. Schön in ein Case gepackt macht es was her und lädt auch unheimlich zügig.
Michael Jörgler
31 december 2024
Does not work with PD chargers, only outputs 4.6V and voltage cannot be set. Missleading or wrong product description in the best case or a simple scam in the worst case.
Aanbevolen producten
