Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Polartherm X-10 by Thermal Grizzly - 2 gram CPU thermische pasta voor CPU en GPU - Hoge thermische geleidbaarheid, lange duurzaamheid, niet-geleidend thermisch vet - Thermische compound kit met spatel

2,99€ 7,36€
Gratis verzending bij bestellingen boven 25,99€

1.Model:10 Gram


Productdetails

  • UITSTEKENDE PRIJS-PRESTATIEVERHOUDING: De X-10 CPU thermische pasta biedt topprestaties tegen een onverslaanbare prijs. Ideaal voor hobbyisten en professionele pc-bouwers.
  • HOGE THERMISCHE GELEIDING: De X-10 is geoptimaliseerd voor instapmodel CPU's en GPU's en is een hoogwaardige thermische pastakit gemaakt door Thermal Grizzly. Met zijn geavanceerde formule zorgt het voor een efficiënte warmteoverdracht van de processor naar het koellichaam.
  • HOGE DUURZAAMHEID: X-10 is een heatsink samengestelde thermische pasta met gemiddelde viscositeit, waardoor het zeer duurzaam is in budget- en mid-range pc-toepassingen. Het is ook de beste thermische pasta voor pc beschikbaar in dit assortiment.
  • EENVOUDIGE TOEPASSING: De X-10 dry socket pasta kan snel en eenvoudig worden aangebracht met de meegeleverde spatels en applicators.
  • VEILIG IN WERKING: De X-10 PC thermische pasta is elektrisch niet-geleidend en kan dus veilig worden gebruikt op processors en grafische chips.


Productbeschrijving


Polartherm NL
Polartherm NL
Polartherm NLPolartherm NL
Polartherm NL

Ben
20 mei 2025
Habe meine 16 Monate alte günstige Wärmeleitpaste gegen Polartherm X10 ausgetauscht, da die Temperaturen meiner CPU gestiegen sind. Es sind 10°C Grad bessere Werte als meine alternde Paste und 6°C Grad besser als die Billigpaste neu. Ich weiß nicht wielange die Lebensdauer ist, aber die gute Wärmeleitfähigkeit ist schonmal Fakt.
Loke Kwok Leong
14 februari 2025
very good after 5 days breakin now 39c for amd ryzen 5 7600x
Scottie Owens
16 januari 2025
A bit stiff, but easy to apply. I'd avoid using the tapered-tip applicator, as it just wastes too much compound. Stick with the regular tip. Performance is not quite as good as the MX-5 it replaced, but is close enough that I don't care. It's certainly a lot easier to clean than the MX-5, thanks to its stiffness. I wouldn't use it for extreme overclocking, but if you were doing that, you wouldn't be buying this anyway. I haven't used this for my GPU, so I can't comment on its performance there.X-10 is definitely the better choice over X-8, as X-10 has lower resistance and therefore better surface-to-surface heat transfer, despite a "low" conductivity of 3.8W/mK.
Obiwan
15 januari 2025
Von Igors Lab empfohlen, sollte wenig Pumpout aufweisen und lange halten.Die Paste hält was sie verspricht und ist gut zu verarbeiten.Tip: Klecks auf den Prozessor, Kühlkörper auf 60° erwärmen (Fön, Heissluft) und andrücken.Durch die Wärme wird die Paste viskoser und verteilt sich ideal.
Amusquiz
20 oktober 2024
A friend of mine who is a massive tech guy recommended me this stuff, he never tried it himself but had been eying it since it released. I was a bit skeptical at first considering I had never heard about it before and I the only page I could find that had it in stock was this one with zero reviews at the time I found it. I eyed it for a bit and decided it was worth a shot, after all what is the worst that can happen? It arrived with the box a little crushed which isn't their fault amazon should've placed the contents in a box not an envelope considering it contained chemicals. But the product was unharmed and nothing appeared to be missing. Replacing my old thermal paste with the new stuff my temperatures went down massively from 60 idle or 90 gaming to 30 idle 64 gaming with a CPU that normally runs hot. Although this is with a new cooling system entirely, nonetheless it was easy to apply and performs pretty well.