PrimaCreator FlexPlate-Poedercoating PEI 290 x 290 mm

Bought one for my Ender 6 and fits perfectly. Didn’t even have to adjust my z-height as I’m using a bltouch. Frint with the plate was a direct succes (my old glas plate worked fine to but don’t like the glas finish on my prints.

Een fantastische plaat voor alle filament materialen en helemaal voor ASA

Ik heb diverse pei platen en ben nog nooit teleurgesteld om te werken met pei van diverse merken. Maar met dit type ( 165X165 ) heb ik continu problemen met het loslaten van de print en slechte hechting op het bed. Er zit een ssort coating op het blad waardoor het normaal goed hechtende pei niet werkt. Kort, het is veel te glad voor pei. Het origineel bed wat bij de printer zit is stukken beter in dit geval. ;(

According to product description, package should have contain two PEI sheets and a magnetic bed, but in my case there was only one spring sheet and the magnetic bed.

I never expected to get this excited about a 3D printing build surface, yet the PrimaCreator FlexPlate-Powder Coated PEI made me tingle in all the right ways. From the moment I placed it on my printer, it clung to my bed like a lover who’s not ready to let go—firm, yet oh so willing to adjust.Once I got things heated up, I knew I was in for a wild ride. The powder-coated PEI finish felt smoother than I dared imagine, providing the perfect conditions for my prints to stick around. It’s like the bed was whispering, *“Don’t worry, I’ve got you”—*and it really, really did. No embarrassing slip-offs, no awkward half-stuck models—just a firm embrace that had me coming back for more.And the best part? When the print was done and the temperature cooled, I could bend that flex plate with a quick flick of the wrist. My model practically popped off, like it couldn’t wait to show me what it was made of. Talk about a satisfying release—I’ve never had such an easy time removing a finished print. One gentle flex, and the entire thing slid off, leaving my bed ready for the next session.Durability? This PEI surface takes a real pounding. No matter how intense my printing sessions got or how fast I ramped up the speed, it just kept coming back for more. If you’re tired of fragile beds that flake or peel under pressure, this one’s ready to go the distance, time and time again.So if you’re looking to spice up your 3D printing life, trust me—this FlexPlate is more than capable of taking the heat. It’s the kind of upgrade that’ll have you hitting “Print” again and again… and loving every moment of it.

prodotto arrivato in 2 giorni, ben imballato e conservato, stampavo con un piatto in vetro, e avevo sempre problemi, con questo devo dire che ho risolto i problemi di aderenza, e a fine stampa , del distacco del pezzo, consigliatissimo, ottimo prodotto

Aunque me surgía cierta confusión con las medidas que se anuncian, confirmo que las medidas son 245mm de ancho por 255mm de largo.La placa es rugosa por una cara y lisa por la otra. De momento sólo he usado la rugosa.He probado a imprimir con PLA+ y ABS. Ambos materiales se agarran perfectamente y se liberan sin quitar la plancha, es suficiente con dejarla enfriar por debajo de los 30ºC. Para el ABS he puesto la temperatura de la cama a 100ºC y lo aguanta sin problemas.Muy contento con la compra, la verdad.

Comodo per staccare i pezzi senza rovinarli, dopo aver buttato una stampa per tentare di staccarla ho acquistato questo tappetino, unica indicazione che posso dare è aumentare la temperatura del bed a cui si stampa normalmente e di aspettare prima di flettere il piatto o a pezzo caldo si rischia comunque di deformare

Installation sehr einfach, es ist wie Tag und Nacht darauf zu drucken im Vergleich zum Glasbett. Erspart sehr viel Aerger und jeden Cent damit wert auch wenn der Preis erst einmal einen vllt abschreckt