Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad
5/5
5 Recensies

PT100 RTD temperatuursensor (0,23 x 2 inch) NPT-schroefdraad met 2 meter kabel, -50 tot 300 °C

6,99€ 14,66€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • PT100 temperatuursensor met roestvrijstalen sonde 6 mm x 50 mm / 0,23 "x 2" (diameter x lengte)
  • De vertind koperdraad is 2 m lang, waterdicht en oliebestendig.
  • 1/2" NPT schroefdraad standaard USA-schroefdraad
  • Bedrijfstemperatuur: -50 tot 300 graden Celsius.
  • Bedrijfstemperatuur: -50 tot 300 graden Celsius.


Productbeschrijving

Beschrijving:
Deze PT100-temperatuursensor met dunne filmweerstanden heeft stabiele prestaties en hoge nauwkeurigheid.
Specificaties:
Type: RTD PT100 (membraan) A klasse
Bedrijfstemperatuur: -50 tot +300 °C. Lengte van de sonde: 50 mm.
Diameter: 6 mm.
Schroefdraadgrootte: 1/2" NPT
Nominale buitendiameter: 0,84"
Materiaal van de sonde: roestvrij staal.
Draad: vertind koperdraad.
Kabellengte: 2 m (6,6 ')
Gewicht: ca. 100 g.
Inhoud levering:
1 x temperatuursensor.
Opmerking: 1/2 "NPT geeft hier de standaard voor nationale schroefdraad (VS), controleer voor en zorg ervoor dat dit de maat is die je nodig hebt.


Brandon Schrage
16 juli 2025
Couldn't beat the price so I thought I'd try it. It arrived on the slow boat from China about a month after I purchased it. I wasn't in a hurry so no big deal. Packaging was good. Was only 1 degree off. Only issue i can see is the threads are not tapered enough, threads all the way into fitting. Requires lots of tape and thread sealant for it to not leak.
DV
5 juni 2025
Advertised as a 3-wire probe but came with a 4-pin connector.
Sabrina Valentine
22 januari 2025
After isolating from everything I could imagine would interfere, I still get some "jumpy" temp readings. Tried a friends better brand name and they worked. These will work in a pinch but looking to upgrade soon.
jeff b.
11 januari 2025
This is a 4 pin connector , I needed a three pin, and was led to believe this is a 3 pin arrangementWaited weeks for the wrong part.Quite disappointedUpon inspection of the part, there is a missing fastener and the part looks like it was not finished at the assembly line.This needs to go back . Don’t recommend purchase from this vendor
Leonard
18 oktober 2024
Use these as part of a Brewing Mash Temperature controller. Temperature jumps up and down 1-2 Degrees F, so not so great for an OCD perfectionist that wants to hold temperature exactly as programmed. Works but indicated temperature takes a long time to stabilize.

Misschien vind je dit ook leuk