Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

QNAP QM2-2P-244A 2-Slot PCIe Gen 2 Network Expansion Card for M.2 PCIe SSDs

67,99€ 162,80€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Afmetingen verpakking: 5,4 x 19,4 x 12,2 cm (l x h x b)


Productbeschrijving


QM2-2P-244A

Gebruik een goedkope QM2-2P-244A M.2 PCIe 2.0 uitbreidingskaart om NVMe SSD-geheugen toe te voegen aan uw QNAP NAS. De efficiënte architectuur van de QM2-2P-244A maakt het mogelijk om NVMe SSD's eenvoudig te installeren en hun prestaties met een stille koelmodule te maximaliseren. PCIe Gen2 x4 biedt overdrachtssnelheden tot 16 Gbps voor uw QNAP NAS.

Qnap

Over ons:

QNAP (Quality Network Appliance Provider) biedt uitgebreide oplossingen, van de ontwikkeling van software en hardware tot interne productie. Met een focus op innovaties op het gebied van opslag, netwerk en smart video, introduceert QNAP nu een revolutionaire Cloud NAS-oplossing die past in ons innovatieve, op abonnementen gebaseerde software en veelzijdige servicekanaal-ecosysteem.


galdermor
23 juli 2025
El resultado ha sido el esperado, fue perfecto en qnap 530D.
Alain
7 juli 2025
expédition rapide, cette carte fonctionne parfaitement dans mon NAS avec deux SSD PCieelle possède 3 adaptateurs pour différentes solutions de montages dans les serveursje recommande
Savazzi
11 maart 2025
Spettacolare per il NAS - ridotto traffico su disco del 90%Attenzione in quale slot si monta. Per me messo nel primo (quello bianco in alto) non faceva fare il boot al nas, nel secondo tutto ok.Ottimo anche aumento di performance per le macchine virtuali
Stefan
28 november 2024
Top Produkt. Leicht ins Nas einzubauen. Lieferung erfolgte innerhalb 2 Tage. Und es gibt die Karte nirgends billiger.
StoremanUK
19 november 2024
The perfect addition to add super fast cache to my NAS.Simple to instal the NVME drives with sliding catches instead of the fiddly little screws you normally find,The inclusion of thermal pads is a nice touch as you can be sure of giving the drives the best possible cooling for this application.The drives (2 x 240GB) were immediately recognised when the NAS was powered on and booted into the OS. Set up the drives as Raid 1 read & write cache for the single pool. I was able to repurpose the two 2.5 SSD's that were previously my cache drives and use Qtier with them.I now have the benefit of both Qtier and cache.