Quad Monitor Mount voor 17-32 inch - Volledig verstelbare Heavy Duty 4-arm bureaubevestiging, maximale belasting 22 lbs per scherm, klem/doorvoertule, VESA 75/100 mm, zwart

Really good product with solid quality! It’s not hard to install, but it can be heavy, so maybe need at least two people to install it. I have removed one of the arms since I need only three monitors, just like I showed in the pictures.Not all the monitors can be installed on it, the monitor must have the four screw holes on the back. This set is stable overall, we really like it!

Sembra molto robusto, non ho avuto modo di provarlo a pieno carico, perché non ho 4 monitor.È indicato che riesce a tenere fino a 4 monitor da 32 pollici, e fino a 10kg.Il materiale è buono al tatto, il palo centrale che tiene tutto il peso è molto grande, e ci sta che lo sia.È fornito di tutto il necessario per il montaggio, chiave a brugola compresa.Sembra molto buono, 100 euro non mi sembrano tanti per questo prodotto.

After reading several reviews about this monitor stand, I had my reservations about it's sturdiness. But having used it now and having replaced monitors 3 times on and off the stand, sturdiness is not a concern. The arms remain firmly in place without sagging.Assembly of the stand on a desk is easy as well. But I would recommend having a second pair of hands to help mount the monitors. It's helpful to have someone in front and in back of the stand to guide the monitor mount into place. Another concern I had was the design of the arms. They are not telescoping but designed with a hinged elbow, which means the point of the elbows can protrude beyond the rear edge of your desk if you want no gaps between your monitors. Thus the desk may need to pull away from a wall to avoid the bending elbows hitting the wall. I mounted a 32" monitor in the center with 27" monitors on the left, right and top. With the side monitors angled in about 35 degrees, I was able to slide the desk back against the wall to within 2 inches. You can't tell that the desk is pulled away from the wall. I can imagine that if you mount smaller screens and want little to no gap between monitors, you will need to pull the desk away from the wall much more to accommodate room for the elbow bends.There are a few improvements I hope the manufacturer would implement. First provide more cable claps and longer velcro cable straps for neater cord management. Although you don't see the cables with the accessories provided, I know that the cords could be neater behind the screens.Second, the stand is designed for the display and power cables to work their way from the back of the monitor to the top of the center post and then back down to an opening at the bottom of the post. This is circuitous at best and requires the purchase of much long power and display cables to reach your CPU; especially if you have a sit/stand desk. I ended up using other velcro straps to secure the cords with the center post within going through the post from the top.Overall, the stand works great and provides a great work environment if a 4-monitor setup is what you need.

Me ha sorprendido lo fuerte que es la estructura y lo que pesa también.Es muy regulable tanto en altura como en inclinación, o incluso la apertura de los brazos.Como se puede ver en la foto ocupa casi 2 metros, como el sofá.En mi caso he tenido que reforzar la mesa y ponerle otro panel de melamina, ya que tiene bastante brazo de palanca y por si acaso lo he reforzado.

Easy to assemble, solid, saves desk space. Happy with it!