Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

REVODATA 2.5G Micro USB PoE Splitter 5V/3A, PoE naar Micro USB 5V/3A 15W Uitgang, 2.5Gbps Gigabit Ethernet voldoet aan IEEE802.3af/at, Plug and Play voor Smart Home

6,99€ 13,39€
Gratis verzending bij bestellingen boven 25,99€

1.Kleur:Dc 5.5*2.1mm + 12v/1a


Productdetails

  • 【Micro USB 5V/3A-Uitgang】 48V PoE converteert naar Micro USB 5V/3A adaptieve stroomuitgang, de Micro USB-poort levert alleen stroom.
  • 【2,5 Gbps Snelheid】 Ondersteunt internetsnelheden tot 2,5 Gbps, waardoor uw apparaat op volle snelheid kan werken. Biedt supersnelle Ethernet-transmissie zonder vertraging.
  • 【Eenvoudige Installatie】 Eenvoudig uw terminalapparaat van stroom voorzien met de plug-and-playfunctie, automatische detectie van stroom van Power Sourcing Equipment. Automatische levering van de juiste stroom voor het Micro USB-apparaat.
  • 【Meervoudige Bescherming】Ondersteunt de isolatiecircuitbeveiliging, de kortsluitbeveiliging, de overspanningsbeveiliging en kan uw apparatuur effectief beschermen.
  • 【Gebruiksaanwijzing】Door de IEEE802.3af/at PoE-switch of PoE-injector te gebruiken om de splitter van stroom te voorzien, zal de PoE-splitter PoE scheiden in stroom en data via de RJ45-poort en de micro-USB-poort, en stroom en data leveren aan niet-PoE-terminalapparaten zoals smart home-apparaten.


Productbeschrijving

Opmerking:
2.5Gbps snelheid vereist 2.5GB capabele netwerkinfrastructuur, zorg ervoor dat uw netwerkomgeving 2.5G Ethernet ondersteunt.
Specificaties:.
- Ondersteuning internationale standaard IEEE802.3 af/at;
- POE-poort Ondersteuning 10/100/1000Mdatatransmissie
- PD ondersteuning 44V-57V spanningstransmissie, detecteert automatisch de voeding van PSE voedingsmodule
- 5V/3A stroomuitgang via Micro USB, de Micro USB-poort is alleen bedoeld voor opladen.
- Ondersteunt de bescherming van het isolatiecircuit, kan effectief elektrische apparatuur beschermen.
- Ondersteunt de kortsluiting, overspanningsbeveiliging
- 1500V hoogspanningsisolatie
Model: USB0503G-X
Overdrachtssnelheid: 10/100/1000Mbps
Voeding: Ingang 48V DC /0.6A, Uitgang 5V/3A
Norm: IEEE802.3 af/at
TRNF: 1/2(+),3/6(-);4/5(+),7/8(-)
Type interface: 1 RJ45-ingang, 1 RJ45-uitgang, 1 DC-uitgang (micro USB)
Standaard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af, IEEE 802.3 at
LED: Geel PoE-lampje
Temperatuur: Werk binnen -20~50°, Opslag binnen -30~60°
Vochtigheid: Werk binnen 10% ~ 90% (niet-condenserend), Opslag binnen 5% ~ 95% (niet-condenserend)
Afmeting: 27.5 x 2.8 x 2.3cm
Gewicht: 0,05 kg
Inhoud verpakking:
1 * Gigabit POE Splitter (USB0503G-X)


Q-Diggity
10 augustus 2025
Typing this on a PC that is connected through a 2.5G switch that is being powered by the 2.5mm 12v POE splitter.I just ran iperf3 and got the exact same results as the same switch running without the POE splitter.Seems legit! Also, bonus points to the seller for responding pretty quickly when I asked a question (amazon has the spec as 1G).
Buckeyes
1 mei 2025
I have bought a few of these to use with Raspberry Pi 4B and they work great!A PoE switch is obviously required. I was happy that there are no issues with power/undervoltage warnings etc as I have experienced these with non-official power adapters in the past. These are literally plug-n-play and “just work” when paired with an Ethernet cable and PoE switch.The build quality is great and I have been using them for about a year without any issues. They cost me around £14 a piece (although I would value them around £10) but overall I would say they are good value for the money.I rate this product 5/5 * as it does exactly what I expect with no surprises, and frees up the plug socket for something else. Fantastic!
922Vision
24 april 2025
It works! Delivers 12.2v - constant, stepped down from 48v POE.POE in, Data & 12v out
JohnDoe-2010
15 januari 2025
Ich nutze den Splitter ab einen Raspberry Pi 5 (Raspi 5) mit 8 GB RAM in einem Gehäuse (Argon One v3 M.2), in dem eine SSD (Kingston NV2 NVMe PCIe 4.0 Interne SSD 1TB M.2 2280) verbaut ist. Das Gerät hängt an einem PoE-Switch (Netgear GS316EP) und wir nun von diesem mit Strom versorgt.Das ganze läuft zuverlässig ohne Warnungen und auch bei Belastung des Raspis habe ich keinerlei Probleme provozieren können.Durch den Einsatz der Splitter (ich nutze die mit Micro-USB Stecker auch noch mit anderen Geräten, darunter RPi 2B, RPi 3B, RPi Zero 2) später ich Netzteile mit entsprechenden Verlusten, habe - abgesehen von den Zeros - ein Kabel weniger, kann die Geräte über den Switch remote Powercyclen und sobald der Swich mit USV gesichert ist, werden es auch die Geräte sein. Darüber hinaus kann ich problemlos alle Gehäuse nutzen, da rein PoE-Hat entfällt, der hier einschränkend wäre. Insofern ist es eine sehr runde Lösung für mich.Schön wäre es, wenn man die LEDs an der Netzwerkbuchse der Splitter abschalten könnte.
Razu
1 november 2024
Excelente, cumple su cometido a la perfección.