Ruicaifu 4 Stuks Koffer Wielen Vervanging - 50mm Rubber Stomme Bagage Wielen Voor Trolley Skate (Met Metalen Reserveonderdelen)

Easy to install, nice, quiet

Had 10 year old a. tourister coffer. Wheels cracked on them due to age, usage and handling. Was not going to buy a new coffer given the fact that it's perfectly fine other than the broken wheels. I took the wheels off using a multi-tool and steel saw head in about 3 minutes, and mounted the wheels in 3 more. Top product!

Great to give some live back to my trolley luggage. Let’s see long term how it goes.

The only issue was the lack of instructions, particularly on how to remove the old wheels, which needed to be sawed off. However, once installed, the new wheels work perfectly on my suitcase.

Voldeed aan de beschrijving. Inbus sleutel erbij Paste preciesPrijs Vond ik goedkoop

100% as described/promised.

The delivery was on time. Everything ok!

Parfait

I have replaced wheels of my well used 7 year old luggage wheels with these. Easy to install, good quality and very smooth.

De media kon niet worden geladen.

Perfekt! Die alten Rollen ausmessen und einfach austauschen! Alle Teile für den Einbau vorhanden! Gute Qualität laufen super! Einziger Kritikpunkt der aber nichts mit der Funtion zu tun hat, die Roolen sind einseitig bearbeitet was optisch nicht so gut aussieht. Ich habe sie so angeordnet das das immer innen ist!

I just finished installing these. The kit came with everything needed for the wheels themselves, including allen wrenches for installing them. The wheels, and axel parts seemed great and were as described. My only warning is that you should measure the wheels on your existing bag (width and diameter), as well as the spacing between the wheel supports to determine the size of axel you will need. Not all suitcase wheels are the same. I measured my wheels, chose this product, and was very satisfied.A word of warning. You may want to check how your current wheels are mounted to see if you’ll want or need any additional tools for the removal of your old wheels. I was replacing 4 wheels on a spinner roller board from Travelpro. A few observations in case it helps others. Firstly, getting the old wheels off was a bit of a hassle. The wheels were mounted with a compression fitting on the original axel. The only way for me to remove the wheel was to use a hacksaw to cut through the original axel.Before I could feel comfortable doing this though, I needed to remove the wheel assembly. This was fairly simple, and only involved unzipping the inner fabric and then using a screwdriver to remove the screws holding each wheel assembly in place. This was a bit time consuming but did not require any special tools, just patience.Once I removed the wheel assembly from each corner, I was able to then remove the actual wheel mount (the part that swivels and holds the wheel axel). This involved a lot of strength, a special screw driver head, and an extra tool to grip the screwdriver for additional leverage to break the screw free. Once started though, this final screw came loose and I had just the bit of plastic that held the actual wheel and axel.Once I had this last piece from each wheel/corner separated, I then used a hacksaw to saw through the wheel axel using the hacksaw mentioned above. It took a few attempts to find a secure way to hold the wheel/axel piece secure enough to saw through but also safe enough that I wasn’t sawing towards my hand. The actual process of sawing through the original assembly was surprisingly easy. I found that between 100 & 150 strokes of the handsaw was enough to cut through each axel. This part of the process probably took 1 to 2 minutes per wheel. It took less time to cut through the axel than it did to remove each wheel assembly from the bag and then to remove the swivel/wheel mount. So, I’d consider sawing through the original wheel axel a fairly minor but important step, especially if you already have a hacksaw lying around.In short, the product itself was fairly simple, seems sturdy, met the description online, and should fit your purposes. Just be sure that you know what size wheel you need so that you get the right part, and give some through to how you are going to remove your old wheels. If your old wheels are attached with axels that screw together, then the whole process of swapping out the wheels should take at most 5-10 minutes. If you have to cut your old axel off, you are likely in for closer to 30 minutes to a couple of hours, depending on the tools you have around and how comfortable you are using them.