SCUBAPRO Premium Retractor met Snap

Sie sind stabil, halten gut am Jacket und bei mir einer Lampe. Sie wurden in Deutschland getaucht und haben einwandfrei funktioniert.

I saw another reviewer (Robert M) who did a similar install - I wanted to offer mine:Up front: I started with the multi-mount ($22) accessory that is meant to go with the Hydros Pro (but I assume you could do something similar with whatever BC you have)1. ScubaPro Premium Retractor: I unscrewed the 4x screws that kept the overall housing together (be careful)1a. Take out the plastic "Stop Button", (I had no use for this feature) leaving you with perfectly aligned holes.2. I took out the bolt snap that came with it (this drastically reduces the overall size of the retractor)...immediately re-install the bolts to keep everything tight.3. I purchsed the same bolts (but longer) from Home Depot (Stainless)4. I hack-sawed about 1/8" from the purchased tipped screw (to keep the depth and prevent any sharp edges)5. I kept the plastic washer, and mounted the retractor, using the "created holes" from the vacant "stop button" and into the "multi-mount".--- --- ---6. I then unscrewed the existing 2x phillips head black screws from the other side, and replaced them with 2x eyelet screws (also from Home depot (stainless), same pattern...7. I fished a zip-tie through these 2x eyelets, arount the multi-mount, and secured everything.Permanent mount, streamlined, and clean!You may notice I replaced the split ring with a black solid ring...this is just my OCD, and not needed. By all means, have at it!I hope this helps!

Très pratique pour se libérer une main sous l’eau

Convient parfaitement, le blocage par bouton est un plus!

Works perfectly!