Set van 4 schuimrubberen voorruiten voor microfoon voor Sennheiser HMEC-25, HME100, HME110, HMEC-400 en gaming-headsets

No están mal.No me quedan muy estéticos en mis Epos h6pro, pero cumplen la función decentemente y no son los típicos de cascos chinorris.

Une honnête bonnette, qui s'adapte bien au micro baume de mon Poly Voyager Focus 2

These pop filters have a 7-8mm hole down the middle, and are ideal for putting over the small microphone on a gaming headset, to reduce pop sounds when speaking.The listing says the bore is 8mm, but it's actually slightly smaller. It was a perfect fit on my Razer Kraken, which has a very sensitive mike and really needs a filter like this. The foam is stretchy, so with a bit of care I was able to get the filter over the 12mm body of the calibrated reference mike I use for setting up the acoustics in my home studio. It also fitted over the mike on my Sony Inzone H3 gaming headset with a little gentle persuasion.The filter is longer than it really needs to be for my applications. I could cut it shorter, but it really doesn't matter. The only thing I need to remember is that the mike on the Kraken headset won't retract fully inside the earpiece with the filter on.A pack of four filters costs £9, which is fairly reasonable.

Un peu long pour un casque hme 100

Produit conforme à la description