Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Shinto Zaagvijl rasp L

14,99€ 28,14€
Gratis verzending bij bestellingen boven 25,99€

Over dit item

  • Voor het bewerken van hout, nieuwe bouwmaterialen, aluminium en kunststof en voor het verwijderen van de verf
  • Geen verstopping met het zaagblad
  • Geschikt voor hout-, PC-, aluminium en messing-bewerking
  • Materiaal: koolstof-gereedschapsstaal
  • Uitstekende duurzaamheid door de combinatie van een metalen zaagblad


Hout, nieuwe bouwmaterialen, aluminium, kunststof verwerking, om verf te pellen. Niet kloppen. Als je gebruik maakt van het mes van goud Setsunoko, houtbewerking, pc, aluminium, messing, enz. kan deze worden gebruikt.


Jeroen
9 juli 2025
Arrived swiftly and well-packaged. It works great, much faster than a chisel and sand paper. It's very versatile: the coarse side for rough shaping, and switching to the fine side to leave a smooth surface. Doesn't even need sandpaper afterwards if used with a gentle hand.
Mens
17 juni 2025
Na een paar keer gebruiken begint het metaal te buigen en zit het handvat los.
fabricio e.
20 april 2025
Era o que eu esperava.
Julien
20 februari 2025
Cette râpe est top ! Elle m'a permis de travailler des bois relativement durs (aulne, érable) tout en ne s'usant pas très vite.Elle est très efficace, avec peu d'énergie et de temps, on enlève efficacement beaucoup de matière.Il y'a deux coté sur la râpe : une avec de grosses dents pour aller vite et une avec des dents plus fine pour un travail plus précis.Aucun regret pour cet achat qui m'aidera grandement dans mes travaux du bois.
Heikki Rodén
30 januari 2025
Som rasp (både grov och fin) är den otrolig! Tiden får utvisa hur länge den levererar….
Jordan Marceau
29 januari 2025
I've seen this type of rasp around on the internet for a while, and always wanted to try one but could never get myself to bite the bullet.So of course I finally did, and this thing is everything I hoped to be and more. It flexes a little bit if you put too much pressure on it, but the way this tool works you don't need that much pressure.There's a very coarse side, and a finer side. For those of you who don't know what it is it's basically a bunch of Hacksaw blades that have been bent and riveted together. I'm well it seems like a super simple concept, it's actually one of the most helpful tools I've purchased in years.Even the Rough Side leaves a pretty nice finish, it removes material from some of the toughest woods I've worked with pretty easily, and even though it's flat, if you use the right technique you can actually work on inner curves too.There's no flex if you pushing down on the face where the teeth are, but if you push sideways on it it will start to flex a bit. I can't say it'll break if you push it too hard, but you're not really supposed to use it that way anyways.At the end it's a really good tool and if you've been looking to try one, I definitely suggest this one.Also a pro tip, wear gloves because this will shred your fingers like no tomorrow if you use your hand to support it.
Mr. R Longhorn
17 januari 2025
Do not know how I got along without this in all my years of woodworking. I use it almost daily now and have retired most of my 'normal' wood rasps.

Misschien vind je dit ook leuk