SilverStone SST-SG13B - Sugo Mini-ITX compacte kubusbehuizing, mesh frontpaneel, zwart

Çok güzel bir kasa fakat ana kartım sığmadığı için üzülerek iade ettim alacak olan arkadaşların buna dikkat etmesi dileğiyle

Che dire, case esteticamente bellissimo, costruito con materiali di qualità e anche molto solido.Il case non è piccolissimo come ci si aspetta per i classici itx, ma permette di installare componenti top di gamma, Aio da 120 e GPU di tutte le lunghezze! Avevo installato un Asus Rog Rx5600xt!Unica cosa, i vetri sono neri quindi se amate le lucine dovrete caricare bene con i led!Unica pecca, se poi proprio vogliamo trovarne una la gestione dei cavi non è il massimo, consiglio alimentatori Full Modulari e cavi sleevati.

スモークガラスなので光るパーツでよりカッコ良くなります組み立てはパズルのようでしたが、説明シールがあり簡単にできます格安で購入できて大満足発送も迅速でした

Brilliant value for money.I built a ryzen 5 3600 system in mine and have been very pleased with it.In terms of what you can get inside well this is an ITX case for ITX motherboards. There is a drive plate that sits at the front of he case on the top struts. On that you can mount either two 2.5 inch drives or one 3.5 inch drive.At the front left at the bottom of the case there is another mounting point for a 2.5 inch drive. However that being said there is enough extra room on the front right side of the case to vertical mount another 2.5 inch drive flush against the front panel. There are no mounting points there but I used some velcro tape for this purpose and it worked perfectly.The case supports a 140mmfront fan but be aware that if you're doing so the extra height on it will impact the top drive mounting plate position. You can fit it in but it will be misaligned with the screw holes in this case. So you're either going to have to drill a few more holes or take the easy option like i did of using strong velcro tape cut to the width of the struts.This case supports full sizeATX PSUs but I wouldn't recommend it as the clearance above the cooler is going to be very tight especially If you're using a stock air cooler. It's best to use a modular SFX power supply. It'll give you a lot more space for much needed cable management. However if you are going to do that please be aware that you will also need a ATX - SFX adapter plate to mount it. This is not included as standard with the case or even in many PSUs so this will likely be a separate purchase.If you're mounting a SFX PSU at the back right side of the case there is space there for another fan depending on the specifics of your motherboard configuration. You'll be able to fit a 92mm fan there but again this is not an official feature of the case and will take a little rigging with cable ties or more of my favorite velcro tape but it fits and works at least for me. Something to consider is how many fan headers you have your motherboard. If you've only got the one you'll probably have to run another cable and likely adapt it from a molex connector.As for the GPU the you're going have to your check sizes on that. 53mm max width and 280mm max length, 129mm max height (Any more than this on the height whilst it may fit in the case itself you'll struggle with fitting the PCIE connectors in the card and subsequently fitting the top drive tray in the case as it fits over it.)My last recommendation is buy lots of zip ties and a roll of velcro tape. You'll thank me latter as it very tight to build in. Getting good airflow is absolutely possible but it take a fair amount of trial and error with and it's good to have more zip ties so you can redo sections if you encounter any annoyances which will inevitably crop up. (At one point I had to remove just one stick of ram and I had to undo everything I had done!)Overall this is a very versatile case with ample opportunity for modding.

Ottimo case con dimensioni davvero piccole ma con una linea elegante tant'e che l'ho messo nel mio salotto vicino ad un televisore lg da 45 pollici ultra piatto. Consiglio a tutti di prendere un alimentatore SFX altrimenti uno standard non entrerebbe all'interno del case. Davvero soddisfatto.