Sul fare nulla da dire perfetto per le mie esigenze, creare un nas domestico perfettamente manutenibile e funzionale.Ma il processo di spedizione un vero disastro, consegna effettuata con ups in ritardo di 24h e non solo decide per qualche assurdo motivo di portare il mio pacco ad un centro di ritiro invece di consegnarlo per un presunto “tentativo di consegna” mai effettuato.Se non fosse stato per la spedizione il prodotto meritava 5 stelle!

Después de leer reseñas por internet me decidí a comprar esta caja y en realidad está muy bien, pero no puedo estar mas decepcionado. La calidad de la chapa es regulera, pero la parte mas cara, la bahía de discos hot-swap, en los dos casos tenía fundidos algunos leds de estado de los discos duros. Puede ser una chorrada, pero en un producto de ese precio, el fallo es imperdonable. La tuve que devolver por dos veces, ya no me arriesgué una tercera

Vše funguje bez problémů. Ale chce to trochu přemýšlet.Ventilátor HDD jede na 100% a je dosti hlučný, když je zapojený do HDD šuplíku. Je nutné ho zapojit do matherboardu (4pin), kdy podstatně ztichne. Ale pak je dobré zajistit řízení ventilátoru podle teploty HDD, mají tendenci být na 40C i když ventilátor běží na 40%.Skříň není vhodná na výkonný processor, bude problém ho uchladit.Do skříně jsem dostal mATX desku s externí GPU a 160mm zdroj, ale kabely není jednoduché uspořádat, aby nepřekážely některému z ventilátorů a nebránily proudění vzduchu. Ale možné to je.

Boitier un peu gros, ventilation peut optimisée, un prix un poil elevé.De bonne qualité général, une version uniquement ITX avec des dimension plus petite serai un gros plus.

I purchased the SilverStone Technology CS351 in September 2022.The outside of the case looks aesthetically pleasing & the lockable x5 hotswap drive bays on the front for replacing hard drives makes it very functional too. these bays have indicators for displaying the drive status I`m pleased to say Silverstone have thought about cooling and there is plenty of mounting points inside for x3, 40mm. X2 60mm fans. The case comes with as standard with an 80mm fan to cool the hotswap 5 bays. However I wasn`t happy with noise d.b given off from the stock Silverstone fan that was already factory installed. So this was replaced with a 80mm Noctua PMW fan. Which was much quiter.Now to niggles the inside of the case hadn`t been powder coated, especially given the cost of the case as at the time I paid £205.45 truthfully you would of thought Silverstone would done that. Ok there is no window to this case. So you won`t see that it hasn`t been coated. However there are many lower end priced cases without windows that have powder coating on the inside. So big dissapointment Silverstone.Also I did find parts of the metal on the inside sharp as they hadn`t been smoothed off. I had to file them down with a small file. Again given the price you shouldn`t have to do that part yourself. Truthfully it felt like going back to old days when i used to do builds with cases that suffered this issue all the while & you used to get them nitty gritty cuts. So another let down from Silverstone there.The top and left & right side of the cases cover has good ventulation holes and there good amount of holes at the back of case too. this is a thumbs up there.The Front I/O includes USB Type-C x 1, which is goodalso on the front I/O there is USB 3.0 x 2, combo audio.Even though it is a compact Micro ATX case There is still plenty of space for CPU cooling and also plenty of space for hard drives as the case Supports 8 x 2.5" hard drive and up to 7 x 3.5" hard drives. I also like that you are able to use a standard ATX PSU. But I would say it is better to use a SFF PSU for better air circulation. There is limitations to size cpu cooler heatsink & GPU you are able to use so it is best to check this first before purchasing.Finally I expected a better coating on the plastic on the front to be of a better coating as this will mark fairly easily. Fortunately I`m pleased to say as of yet I haven`t had any scraps to confirms this. But I have had cases with the same coating and it has suffered marks because of this type of coating.The case overall for a Micro ATX case ticks the boxes in some areas, however its doesn`t come without its niggles that I have already highlighted. Which is a shame really as the case has a lot to offer. This is why I can`t give it full marks as I would of liked to. Hopefully they can sort that part out? If they did then maybe I would buy another case as I plan to do another NAS build and I would be able to give a better review in the near future.