Siraya Tech 3D Printer Hars Beeldhouwen Hoge Temperatuur Resolutie Weerstand Hars voor DLP/LCD Printers Zoals Moonray 3D Printing Snelle Hars voor Engineering Sieraden en Industrieel (Ultra Wit, 1kg)

Good

I was warned this is tricky to print with, but apart from ensuring the temperature is kept to a minimum, it seems no more difficult than anything else I’ve used.I had one initial failure, mostly because of my rush to place supports, but have since printed several items with no issues. Good detail and exceptional dimensional accuracy. I cannot fathom why, but I also use less of this resin for the same models printed with another product. Weird, but good!

La compre para hacer moldes de joyería de goma/caucho ya que la resina resiste la temperatura de vulcanizado de lo moldes.La resina suele imprimir con éxito la mayoría de las veces y reproduce los detalles con fiabilidad.No obstante tiene algunas pegas, como un olor algo desagradable, necesidad de usar con cierta temperatura y resulta bastante frágil, pero el mayor inconveniente es que se pega a los moldes de silicona vulcanizable, lo que hace que sea poco útil para hacer moldes. Si se compra para otros usos puede ser una opción recomendable.

I use this resin for printing lens mounts for IP camera modules. The modules can get quite hot, so I went looking for a good HT resin. I had used other resins from Siraya Tech before, and was pleased with the results, so decided to give Sculpt a try. For this application, it has turned out to be a near-perfect solution. It prints clean without much shrinkage. There's a bit of warp on the first few layers, but the layers that count are plane parallel to one another. The only drawback is that it is a thick resin, so you will find that the solids in the resin will settle out over time. Shake/mix well and empty your vat after use and you should be golden. In terms of printability, I haven't had any failures, yet, and I'm fairly relaxed when it comes to controlling things like room temperature. I print with Siraya Tech's recommended settings for my printer, stir my vat between prints and the results are always good.

Perfect brand and perfect quality. High detail printing with that Resin.also its High temperature durable good for moulds