Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

SmallRig Rotating Side Handle with Trigger REC for Canon Selected Cameras, for Blackmagic Design Selected Cameras, Compatible with F550/570 Battery, Shutter Control, for Canon R3 / R5 / R6-5235

52,99€ 132,78€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Compatibiliteit: SmallRig roterende zijhandgreep 5235 is ontworpen om de stabiliteit van opnamen uit de hand te verbeteren en de bediening van cameraregistratiefuncties te vergemakkelijken. Het is niet alleen compatibel met Canon R3 / R5 / R5 Mark II / R5C / R6 / R6 Mark II / R7 / R8 / R10 / R / RP / C70, maar ook met Blackmagic Design BMPCC 4K / BMPCC 6K / BMPCC 6K Pro / BMPCC 6K G2 / BMCC 6K FF.
  • Ingebouwde sluiterbediening: SmallRig roterende zijhandgreep met trekker REC 5235 heeft een ingebouwde sluiterbediening en een bijgeleverde bedieningskabel, je kunt gemakkelijk starten en stoppen met opnemen zonder je camera aan te raken, waardoor je efficiënter kunt fotograferen.
  • Traploze rotatie met één klik: Deze zijhandgreep maakt soepele camerabewegingen onder elke hoek mogelijk met de functie voor traploos draaien met één klik, zodat je met precisie en gemak dynamische opnamen kunt maken.
  • Ondersteunt PD snel opladen: NP-F550 / 570-batterijen kunnen aan de onderkant worden bevestigd, zodat andere apparaten of de handgreep zelf kunnen worden opgeladen via de USB-C IN/UIT-poorten. Met een maximale input en output van 20W ondersteunt het meerdere snellaadprotocollen, waaronder PD, QC, AFC en FCP.
  • Meerdere bevestigingspunten: De Side Handle van de sluiterbediening heeft gaten met 1/4"-20 schroefdraad, een cold shoe bevestiging en een strap slot voor het bevestigen van accessoires zoals monitoren, invullampen en polsbandjes. Het ergonomische handvat met siliconen coating zorgt voor een comfortabele grip voor beide handen.
  • Opmerking: 1. Het pakket bevat niet de NP-F550 of NP-F570 batterijen. Als je de SmallRig NP-F550 batterij (ID: 4331 / 4971) gebruikt, verwijder dan de adapterplaat in het handvat. 2. NP-F550 / 570 batterijen zijn nodig om de bediening van seriecamera's voor Canon en seriecamera's voor Blackmagic Design's BMPCC mogelijk te maken. Het bedrijfsvermogen van de R5C voor Canon en de BMPCC 6K Pro voor Blackmagic Design is hoger dan 20W, terwijl het maximale uitgangsvermogen van de handgreep 20W is, dus het kan de voeding voor deze modellen niet ondersteunen. 3. Wanneer er weinig ruimte op de geheugenkaart over is, kan de handgreep de opnamefunctie van de camera mogelijk niet bedienen.


Productbeschrijving

"SmallRig Rotating Side Handle with Trigger REC for Canon for Blackmagic Design Cameras 5235
Key Features:
1. Ergonomically designed for a secure grip, ensuring seamless camera control
2. Built-in shutter control with a complimentary control cable to start and stop recording
3. One-click stepless rotation enables fluid camera movement at any angle
4. USB-C power output supports PD fast charging for quick power delivery to other devices
5. Features 1/4""-20 threaded holes, a cold shoe mount, and a strap slot for attaching accessories like monitors, fill lights, and wrist straps
Description:
SmallRig Rotating Side Handle with Trigger REC for Canon for Blackmagic Design Cameras 5235 is designed to provide a secure grip for seamless camera control. The handle features an integrated shutter control function and is compatible with NP-F550 / 570 batteries for extended power supply. The ergonomic handle, coated with silicone, ensures a comfortable grip for both hands and offers one-click, stepless rotation for fluid camera movement at any angle.
This handle integrates a REC button with a complimentary control cable to control recording. In addition, it allows for attaching NP-F550 / 570 batteries to the bottom, enabling charging of other devices or the handle itself using the USB-C IN / OUT ports. With a maximum input and output of 20W, it supports multiple fast-charging protocols including PD, QC, AFC, and FCP. The handle also incorporates 1/4""-20 threaded holes, a cold shoe mount, and a strap slot for attaching accessories like monitors, fill lights, and wrist straps.
Note:
1.The package does not include the NP-F550 or NP-F570 batteries. When using the SmallRig NP-F550 battery (ID: 4331 / 4791), remove the adaptor plate inside the handle.
2.NP-F550 / 570 batteries are required to enable control of series for Canon EOS and series cameras for Blackmagic Design's BMPCC. The operating power of EOS R5C for Canon and BMPCC 6K Pro for Blackmagic Design exceeds 20W, while the maximum output power of the handle is 20W, so it can not support the power supply for these models
3.When the remaining memory card space is low, the handle may not be able to control the camera recording function.
Compatibility:
For Canon:R3 / R5 / R5 Mark II / R5C / R6 / R6 Mark II / R7 / R8 / R10 / R / RP / C70
For Blackmagic Design:BMPCC 4K / BMPCC 6K / BMPCC 6K Pro / BMPCC 6K G2 / BMCC 6K FF
Package:
Handle x 1
Control Cable for Canon for Blackmagic Design × 1
NATO Rail x 1
Allen Wrench x 1
"


K.necS
29 maart 2025
I'm a big fan of side handles, and I own a lot of them. This one from SmallRig is a great size, has a nice grip feeling, and is multi-functional.It comes with two usb-c ports, one supports the rec control and the other one provides the output/input for power delivery.Although its main purpose is to be used on the right, you can still use it on either side if you like.The PD output is a great helper in providing additional juice for your camera.For the rotating function, the mechanism works much better than the existing one from SmallRig. It's smooth and stable, and I haven't encountered any stuck so far.**Another note: if your camera is not on the REC support list, you can purchase any USB-C to shutter port cable to make the handle REC function work.
Tim P
22 februari 2025
Der Griff funktiert leider nicht an der Canon R5C. Akku ist nicht enthalten, dieser muss separat erworben werden.Griff wurde mit der Kamera verbunden, zwei Sekunden die Start Taste gedrückt aber die Aufnahmefunktion bei der R5C funktioniert nicht.Verarbeitung und Qualität sind gewohnt super.Was kann der Grund dafür sein, das der Griff an der Canon R5C nicht funktioniert?Eventuell ein defekte Gerät?
Al Perez
10 januari 2025
Works on initial oliver up, then does not REC. Working with SmallRig tech support for a fix.
Rawlee
28 december 2024
Well made handle, however the joint that allows for spinning is shaky and has a noticeable give when you're trying to tighten your grip on the camera. The button to allow for spinning occasionally sticks. Difficult to film with when the side handle is not secure and stable.For some reason, no matter what I do I cannot get the trigger to start filming when connected to my ZV-E1. With or without batteries this does not function with Sony based on my experience even though the instructions expressly say that it should work.May return this something cheaper.