Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

SmartFly info TF-Luna Lidar-sensor, 0,1-8 m, korte afstandsafstand, enkelpunts afstandsmeetmodule UART/I2C, compatibel met Pixhawk, Arduino en Raspberry Pi voor het vermijden van drone-/robotobstakels

11,99€ 24,99€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • [Single-point Ranging LiDAR] TF-Luna is een single-point ranging LiDAR, gebaseerd op TOF principe. Met uniek optisch en elektrisch ontwerp, kan het stabiele, nauwkeurige en hoogst gevoelige bereikmeting bereiken
  • [Laag stroomverbruik] Stroomverbruik van TF-Luna is lager dan 0,35 W, geschikt voor scenario's met batterijvoeding of laag energieverbruik
  • [Slank figuur maar grote vaardigheid] eenvoudig te installeren en te integreren met 35 mm x 21,25 mm x 13,5 mm groot, het is 5 g in gewicht wat geschikt is voor scenario's met strikte belastingsvereisten
  • [Brede toepassing] Voetgangersdetectie, voertuigdetectie, intelligente barrièrepoort en hoogtemeter, robot valdetectie/anti-val, drones obstakel vermijden en hoogte hold modus, obstakel vermijden, verkeersstatistieken, voertuig crash waarschuwing
  • Eventuele technische problemen na aankoop klik op "SmartFly Tech" op de pagina en stel een vraag


Productbeschrijving

Werkbereik: 0.2m ~ 8m (90% reflectiviteit)

Nauwkeurigheid: ±6cm@(0,2-3m), ±2%@(3m-8m)

Meeteenheid: cm

Bereik resolutie: 1 cm

FOV: 2°

Framesnelheid: 1 ~ 250Hz (standaard instelling is 100Hz)

Voedingsspanning: 5V±0.1V

Gemiddelde stroom: ≤70mA

Piek stroom: 150mA

Gemiddeld vermogen: 350 mW

Communicatie niveau: LVTL(3.3V)

Communicatie interface: UART/IIC

Standaard baudrate: 115200

Gegevens bit: 8

Stop bit: 1

Pariteit check: Geen

Lichtbron: VCSEL

Golflengte: 850 nm

Bedrijfstemperatuur: -20°C~75°C

Certificering: CE, FCC, ROHS

Hardware Spec:

Grootte: 35mm*21.25mm*13.5mm (L*W*H)

Materiaal behuizing: ABS+PC

Opslagtemperatuur: -20C~75C

Gewicht:

-Belangrijke toepassingen-

Verkeer Monitoring

Obstakel detectie

Niveau meting

Slim apparaat

-Inhoud van het pakket:

1 X TF-Luna LiDAR Module

Veelgestelde vragen

Q1: Is TF-Luna beschikbaar met 3.3V of andere voedingsspanning?

A1: Sorry, het is voorlopig niet beschikbaar. De standaardvoeding van TF-Luna is 5V±0.1V. Als u nog meer vereiste, neem dan contact op met onze verkoper om een aanpassing ontwerp kwestie te raadplegen.

Q2: TF-Luna zal opwarmen na het werken voor een tijdje. Is het gebroken?

A2: Dit is de normale bedrijfstoestand van het product. De temperatuur van de chip en printplaat zal iets stijgen na een continue werking, wat een normaal geval is.


Eric H
14 juni 2025
L article n’est pas complet il manque le module USB
KpkV
19 maart 2025
The product arrived on time. It is very easy to use and there is a web address provided on the packaging. I have managed to connect it to my PC with the USB to UART and works as expected. I have also managed to make it work using an Arduino once using UART and another time using IIC. I am likely to get a few more in the near future.
Ankur Kumar
21 januari 2025
Where can I get its documentation to either connect and use it with pc or raspberry pi?
R. Done
11 januari 2025
Bought to measure distance to obstruction/person on stairs in my house. Has worked perfectly for a couple weeks or so, without any false triggers I have noticed. I have it set to trigger an event when less than 5.5meters or so, and ignore more than that where people are walking across the landing at the top of the stairs. I am very impressed. Want to buy half a dozen more of these for various other applications.
Dan Espich
18 december 2024
Beware that the colors wires on the pin out may not be what you expect. I thought mine was broke until I realized the colors were not what they should have been for the pins they were connected to on the connector.

Misschien vind je dit ook leuk