SONOFF SNZB-03P ZigBee-bewegingssensor 2 Stuck, draadloze ZigBee 3.0-detector, detectie van 5 seconden, slimme scène, SONOFF Zigbee-bridge vereist, compatibel met Alexa/Google Home

Ich verwende die Bewegungsmelder, um mit Home Assistant mehrere Beleuchtungszonen zu steuern. Die Bewegungsmelder überzeugen durch ihre stabile Verbindung und reagieren stets zuverlässig. Die magnetische Halterung ermöglicht eine flexible Ausrichtung und erleichtert das Abnehmen zum Batteriewechsel. Ich nutze die Bewegungsmelder nun seit einigen Wochen und habe bisher keinen merkbaren Batterieverlust festgestellt. Ich würde diese Bewegungsmelder jederzeit wieder kaufen.

I ordered these Sonoff Sensors to implement into my home assistant setup. The sensors were immediately recognised by the sonoff zigbee 3.0 plus dongle and added to my HA setup. The sensors work great with Alarmo.The sensors were much smaller than I anticipated. They work very well and the sensitivity is high, so much so that my robot vacuum cleaner set these off in the middle of the night. They are also not pet friendly, my dogs were easily detected by each of these sensors. I have had to angle these up towards the ceiling in order that they do not catch the floor area, thus moving them out of the range of my dogs and vacuum. Even though they are pointed upwards they do still detect a human presence which is great, the issue is the range is just not as good now. The sensors can be attached by magnet to a metal base or by the included 3m sticker, or with plain old wall screws.In summary for a home without pets or robots these would work great, either as an alarm sensor or as a PIR for lighting ect.ZHA does not allow the changing of the cooldown time, so you are stuck with 60 seconds. There is a workaround available however this did not work for me, and no matter how much i tried to reprogramme the cooldown time in ZHA the controller failed to write the new parameters. One other thing of note is that the motion sensor sensor in ZHA is always 'detected' so you can not use this, however the 2nd entity exposed is occupancy, this is what you use when implementing to ZHA.I hope you found this review helpful

Materiali ottimi sonoff non delude mai

Great sensor. Works perfectly. Absolutely easy to pair with zigbee2mqtt, works great with home assistant, 100% responsive.

PAs trop cher, et excellent pour faire des scénario sur présence dans une picèe... bien associé à Home Assistant via Zigbee2MQTT... franchement au top.