Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

SONOFF SNZB-06P ZigBee-bewegingsmelder, draadloos, menselijke aanwezigheidssensor, ZigBee Bridge vereist, compatibel met Alexa/Google Home/Alice (2 stuks)

18,99€ 38,99€
Gratis verzending bij bestellingen boven 25,99€

Over dit item

  • 【Aanwezigheidsdetectie】SNZB-06P gebaseerd op een 5,8 GHz microgolfradar, kan het bewegingen of stationaire personen detecteren. Het schakelt de lichten automatisch aan als je dichtbij komt en houdt ze aan totdat je weggaat.
  • 【Lichtgevoel】De ingebouwde lichtsensor zorgt ervoor dat de lichten alleen branden als er in het donker een aanwezigheid wordt gedetecteerd, wat je helpt om energie te besparen.
  • 【Zigbee 3.0 compatibel】Ondersteunt Zigbee hubs met Zigbee 3.0-protocol, zoals SONOFF NSPanel Pro, SONOFF iHost, SONOFF ZB Bridge Pro, SONOFF ZBDongle-E en Echo Plus 2nd ...
  • Lokale Smart Scene: de scèneverbinding tussen Zigbee-apparaten kan normaal worden uitgevoerd, ook als er geen internetverbinding is.
  • Ondersteuning voor meerdere platforms: ondersteunt Alexa, Google Home, Smartthings, Alice, IFTTT en Home Assistant.
  • Opmerking: SNZB-06P is niet waterdicht en wordt niet aanbevolen voor installatie of gebruik in een badkamer.



Productbeschrijving

De video toont het product dat in gebruik is.De video begeleidt u bij het instellen van het product.In de video worden meerdere producten vergeleken.De video toont hoe het product wordt uitgepakt.
SNZB 06P
SNZB 06P
SNZB 06P
SNZB 06P

RG
2 augustus 2025
The least I expected from this device is the consistency and reliability , just because there is constant power source. But this device works 4 out of 10 times . More over this is not really a presence sensor it is just a glamorised version of motion sensor. If you are still then the occupancy will turn to clear. I don't understand how different it is from motion sensor. Everytime device stop working I need to re-pair the device and reload zigbee network and restart home assistant all these I do atleast once a day. Sometimes issue will be fixed sometimes not. After getting frustrated I will just leave it and randomly it will start working.There is a major issue with design. Just the magnet part is good that is also not very strong, because we have to connect the wire to the device you cannot really rotate in all directions because of this even magnetic feature is useless. You also need to have power source and cable will be lying everywhere. Aesthetically this device setup does not look goodThe light sensor is also not every useful. It is not based on lux value. It just says dark or light . Both in exterme conditions. After sunset just before complete dark it is still considered as light. Hence you cannot set up 100% automation. During that period I will have to manually perform activitiesThis actually is a costly investment, just this presence sensor is unusable. In addition to this you need zigbee hub and a usb charger because out of the box there is just cable.
bjorn
29 juni 2025
werkt niet, blijft altijd aangeven dat er beweging/activiteit is, integreert voor geen meter met home assistant.
Yanne
7 juni 2025
Detect presence in rooms with homey pro
Andrea
4 juni 2025
Ottimo
Tom Fischer
27 april 2025
Hab die Präsenzmelder mit einem Sonoff Stick bei Homeassistant eingebunden und funktioniert wunderbar!
Ale
11 februari 2025
Funcionan bien, pero cuidado es para conectar por USB la versión a pila es otra
Antonio Manuel
18 januari 2025
Funciona bien pero tarda mucho en activar otro dispositivo como puede ser el relé de SONOFF Zigbbe sin cable neutro.Al detectar la presencia puede llegar a tardar casi dos segundos en actuar y encender una bombilla teniendo incluso la sensibilidad en el valor más alto de detección.